GB 2099.5-2008 English PDF (GB2099.5-2008)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 2099.5-2008
Historical versions: GB 2099.5-2008
Preview True-PDF (Reload/Scroll if blank)

GB 2099.5-2008: [GB/T 2099.5-2008] Plugs and socket-outlets for household and similar purposes -- Part 2: Particular requirements for switched socket-outlets with interlock for fixed installations
GB 2099.5-2008
Plugs and socket-outlets for household and similar purposes.Part 2. Particular requirements for switched socket-outlets with interlock for fixed installations
ICS 29.120.30
K30
National Standards of People's Republic of China
GB 2099.5-2008/IEC 60884-2-6.1997
Plugs and sockets for household and similar purposes - Part 2.
Fixed with interlock switch socket special requirements
(IEC 60884-2-6.1997, IDT)
Posted 2008-12-30
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
IEC Foreword Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 General requirements
5 Test 2 Overview
Rating 2 6
7 Category 2
8 mark 3
9 3 Dimensional inspection
10 Protection against electric shock 3
11 grounding 4
12 Terminals and terminations 4
Fixed receptacle structure 13 4
Structure 14 plugs and mobile sockets 4
15 Interlock socket 5
16 anti-aging, and moisture protection provided by the housing 5
17 Insulation resistance and electric strength 6
18 ground contacts 6 working
19 rise 6
20 Breaking capacity 6
21 Normal operation 6
The force required to pull the plug 22 6
23 soft and cable connection 7
24 mechanical strength 7
25 Heat 7
26 Screws, current-carrying parts and connections 7
27 distance creepage distances and clearances by the sealant 7
Abnormal heat-resistant, flame-resistant and electrically insulating material to tracking 28 7
29 7 rust
Additional tests with a pin 30 of the insulating jacket 7
GB 2099.5-2008/IEC 60884-2-6.1997
Foreword
All technical content in this section are mandatory.
GB 2099 "plug and socket for household and similar purposes" is divided into the following sections.
Part 1. General requirements
Part 2. Particular requirements
--- Particular requirements for fused plugs
--- Particular requirements for appliance socket
Particular requirements --- converters
Particular requirements --- Fixed without interlock switch socket
--- Fixed Particular requirements for interlocking with a switch socket
--- Safety extra-low voltage plug and socket special requirements
This section is Part 2 GB 2099. Fixed special requirements with interlock switch socket.
This section identical with IEC 60884-2-6.1997 "plugs and sockets for household and similar purposes - Part 2. Fixed with interlock switch
Special requirements "socket.
This section should be GB 2099.1 "plugs and sockets for household and similar purposes - Part 1. General requirements" in conjunction.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized.
This section drafted by. China Electric Apparatus Research Institute, Zhejiang Chint Building Appliance Co., Ltd., Hangzhou Hongyan Electric Co., Ltd., Guangdong
Matsumoto Electrical Appliance Co., Ltd., Clipsal Industries (Huizhou) Co., Ltd., Zhejiang Yuehua Telecommunication Co., Ltd., based Electric (Shenzhen) Co., Ltd.
The main drafters of this section. Meng Zhiqiang, Shi Jihua, single toward blue, Zhang Wenjie, He Zhiguo, Tangyan Lan, holy dynasty, Angui Long, Zheng Liqing.
GB 2099.5-2008/IEC 60884-2-6.1997
IEC Foreword
1) IEC (International Electrotechnical Commission) is composed of national Electrotechnical Commission (IEC National Committees) worldwide standardization groups
Organizations. The object of IEC is to promote international cooperation in the field of standardization and related electrical and electronic problems. For this purpose, IEC addition to carrying out
Among other activities, publishes international standards. These standards work is entrusted to technical committees to complete. Each member of the IEC
National Committee, as long as the standard to be developed are interested may participate in this preparatory work. Liaising with the IEC 's international official group
Organization is also involved in the development of standards. IEC and the World Organization for Standardization (ISO ) in accordance with the conditions specified in the agreement, close cooperation.
2) since each technical committee has representatives from the National Commission on the relevant issues of interest, so the IEC on technical
The formal decisions or agreements in question are the maximum expression of the international consensus on the relevant issues.
3) documents generated in the form of recommendations for international use, and standards, technical specifications, technical reports or guidelines published in the form,
And National Committees in that sense of acceptance.
4) In order to promote international unification, IEC National Committees in charge of the IEC international standards transparently converted to the maximum extent possible
National or regional standards. Between the IEC Standard and the corresponding national or regional standard if there is any difference should be made clear after the standard conversion
Explained.
5) IEC did not develop any signs of approval procedures. When a device is declared if it complies with one of its standards of IEC , IEC this
Irresponsible.
6) All users should ensure that they should have the latest version.
7) whether and when and where the direct or indirect, or use or publication or other means of the IEC and the IEC publication
Publication costs incurred (including legal fees) and expenses, IEC or its directors, employees, servants or agents (including individual experts
And members of the Technical Committee) and the IEC National Committee has no obligation to any personal loss, property damage or other natural causes on
Responsible for any loss caused.
8) Note that this publication cited normative references. In order to accurately use of this publication, a reference to the relevant publications are essential.
9) Note IEC publication may be involved in some of the patents subject ingredient. IEC has no obligation to determine whether any or all of these
patent.
International Standard IEC 60884-2-6 by IEC TC23. electrical accessories Technical Committee SC23B plug socket and switch the Technical Committee
Members will be established.
And IEC 60884-1 3rd Edition for use.
This standard is based on the following documents.
Draft International Standard document Report on voting
23B/521/FDIS 23B/530/RVD
Details of the standard vote, voting reports listed in the table above.
This standard is based on ISO /IEC Directives, Part 2 written.
This Part 2-6 of IEC 60884-1 with the intended use. This document is based on the third edition of IEC 60884-1 is established.
This Part 2-6 supplements and modify the corresponding clauses in IEC 60884-1, IEC standard to convert it costs. fixed in chain with a switch
Particular requirements for socket.
In Part 2-6 in Chapter 1, shall apply in this part of the standard continues to apply. Where in this standard marked "increase", "modification" or
By "alternative" content, Part 1 of the relevant contents shall make the appropriate changes.
Reg - Part 1 does not have, graphs or tables numbered from 101 onwards.
When the first part of the applicable provisions indicated applies only contain fixed in chain with a switch socket related requirements.
A list of all parts IEC 60884 series, under the general title. plug and socket for household and similar purposes. It can be found on the IEC website.
GB 2099.5-2008/IEC 60884-2-6.1997
Plugs a...