HJ 209-2017 English PDF

Delivery: 3 seconds. Download true-PDF + Invoice.
Get Quotation: Click HJ 209-2017 (Self-service in 1-minute)
Historical versions (Master-website): HJ 209-2017
Preview True-PDF (Reload/Scroll-down if blank)

HJ 209-2017: Technical requirement for environmental labeling products Plastic packaging products
HJ 209-2017
(Environmental labeling products technical requirements of plastic packaging products)
People's Republic of China national environmental protection standards
Replacing HJ/T 209-2005
Environmental labeling products technical requirements of plastic packaging products
Technical requirement for environmental labeling products
Plastic packaging products
2017-12-11 Published
2018-03-01 implementation
Ministry of Environmental Protection released
Directory
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 basic requirements 1
5 Technical Contents 1
6 test method 2
Appendix A (Normative) Carcinogenic aromatic amines .3
Appendix B (Normative) Phthalate 4
Foreword
In order to implement the "Law of the People's Republic of China on Environmental Protection," to effectively use and conserve resources, reduce the environmental impact of plastic packaging products and human health
Kang's influence, the development of this standard.
The standard of plastic packaging products, raw materials and production processes, product degradation, biological carbon content, printing, labeling, etc. made
Environmental protection requirements.
This standard on the "environmental labeling products technical requirements of packaging products" (HJ/T 209-2005) was revised, the main changes are as follows.
- adjusted the standard name and scope of application;
- Increase the requirements of raw materials and production processes;
- Adjust the degradation of degradable products index requirements;
- Remove the easy to recycle packaging requirements;
- Increased non-biodegradable products biological substrate content requirements;
- Added requirements for heavy metals, polybrominated biphenyls, polybrominated diphenyl ethers, residual solvents in products;
- Increased demand for vinyl chloride and styrene monomer in the product;
- Adjusted product labeling requirements.
This standard is formulated by the Ministry of Environmental Protection Science and Technology Standards Division.
This standard is mainly drafted by. Environmental Protection Department of Environmental Development Center, China Packaging Federation Plastic Packaging Products Committee, Beijing Green
Color career Cultural Development Center, Chaozhou City, Guangdong Province Quality Supervision and Inspection Institute.
This standard MEP approved on December 11,
This standard since March 1,.2018 into effect.
This standard is interpreted by the MEP.
This standard replaces the standards previously issued as follows.
- HJ/T 209-2005, HJ BZ 12-2000.
Environmental labeling products technical requirements of plastic packaging products
1 scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and test methods of environmental labeling products of plastic packaging products.
This standard applies to plastic as the main material for packaging products.
2 Normative references
This standard references the following documents in the terms. For undated references, the effective version applies to this standard.
GB 9681 food packaging PVC molding health standards
GB 9692 food packaging polystyrene resin health standards
GB/T 4122.1 Packaging terminology - Part 1. Fundamentals
GB/T 10004 packaging plastic composite film, bag dry composite, extrusion compound
GB/T 16288 plastic products logo
GB/T.20197 Degradation of plastic definition, classification, labeling and degradation performance requirements
GB/T 21928 plastic food packaging materials Determination of phthalates
Biobased materials - Determination of bio - based content - Liquid - flash counter method GB/T 29649
HJ 2539 Environmental Labeling Product Technical Requirements Printing Part III. Gravure Printing
3 Terms and definitions
GB/T 4122.1-2008 and the following terms and definitions apply to this standard.
3.1 plastic packaging products plastic packaging products
The main use of plastic packaging materials production.
[GB/T 4122.1-2008, Definition 5.6]
4 basic requirements
4.1 products should be consistent with the corresponding quality, safety, health standards.
4.2 The pollutant discharge of the production enterprise shall comply with the discharge standards of pollutants stipulated by the state or local governments.
4.3 product manufacturers in the production process should strengthen cleaner production.
5 technical content
5.1 raw materials and production process requirements
5.1.1 non-degradable plastic packaging does not use thermosetting plastic and foamed plastic as raw materials.
5.1.2 The product manufacturing process does not use azo dyes that decompose into the carcinogenic aromatic amines listed in Appendix A.
5.1.3 food packaging does not add GB/T 21928 listed in the phthalate plasticizers.
5.1.4 non-food packaging does not add the phthalates listed in Appendix B plasticizers.
5.1.5 Product gravure printing process should be consistent with the HJ 2539 requirements.
5.2 Product Requirements
5.2.1 Lead, cadmium, mercury, hexavalent chromium and its compounds, polybrominated biphenyls, polybrominated diphenyl ethers, residual solvents and other products shall comply with GB/T 10004
Request.
5.2.2 Polyvinyl chloride (PVC) products, vinyl chloride monomer content should be consistent with the requirements of GB 9681, polystyrene products containing styrene monomer
The amount should be consistent with the requirements of GB 9692.
5.2.3 biodegradable plastic packaging should meet the GB/T.20197 degradation performance requirements.
5.2.4 Non-degradable plastic packaging biochar content should be greater than 20%.
5.3 Product Identification should be consistent with GB/T 16288 requirements.
6 test methods
6.1 Technical content 5.2.1 testing in accordance with the provisions of GB/T 10004 regulations.
6.2 Technical Content 5.2.2 Vinyl chloride monomer in accordance with the provisions of GB 9681 test method, the detection of styrene monomer in accordance with GB 9692
The prescribed method.
6.3 Technical content 5.2.3 Detection According to the method specified in GB/T.20197.
6.4 Technical content 5.2.4 Determination of biochar content in accordance with GB/T 29649-2013 prescribed method.
6.5 Other requirements in the technical content are verified by means of document review combined with on-site inspection.
Appendix A.
(Normative)
Carcinogenic aromatic amine
Chinese name English name
4-Aminobiphenyl 4-Aminobiphenyl
Benzidine
4-Chloro-o-toluidine
2-Naphthylamine 2-Naphthylamine
O-Aminoazotoluene
2-Amino-4-nitrotoluene 2-Amino-4-nitrotoluene
Chloroaniline P-Chloroaniline
2,4-Diaminoanisole 2,4-Diaminoanisole
4,4'-Diaminodiphenylmethane 4,4'-Diaminobiphenylmethane
3,3'-Dichlorobenzidine 3,3'-Dichlorobenzidine
3,3'-Dimethoxybenzidine 3,3'-Dimethoxybenzidine
3,3'-Dimethylbenzidine 3,3'-Dimethylbenzidine
3,3'-Dimethyl-4,4'-diaminodiphenylmethane 3,3'-Dimethyl-4,4'-diaminobiphenylmethane
Methoxy-5-methylaniline p-Cresidine/(p-Kresidine)
3,3'-Dichloro-4,4'-diaminodiphenylmethane 4,4'-methylene-bis- (2-chloroaniline)
4,4'-Diaminodiphenyl ether 4,4'-Oxydianiline
4,4'-Diaminodiphenyl sulfide 4,4'-Thiodianiline
O-toluidine o-Toluidine
2,4-Diaminotoluene 2,4-Toluylendiamine
2,4,5-Trimethylaniline 2,4,5-Trimethylaniline
O-Methylanisole/2-Methoxyaniline o-Anisidine/2-Methoxyanilin
2,4-dimethylaniline 2,4-Xylidine
2,6-dimethylaniline 2,6-Xylidine
4-Aminoazobenzene
Appendix B
(Normative)
Phthalate
Chinese name English abbreviation
Diisononyl phthalate Di-iso-nonylphthalate DINP
Di-n-octylphthalate DNOP. Di-n-octyl phthalate
Di- (2-ethylhexy) -phthalate DEHP
Di-isodecylphthalate DIDP
Butylbenzylphthalate BBP
Dibutylphthalate DBP