YY 0502-2016 English PDF (YY0502-2016)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click YY 0502-2016
Historical versions: YY 0502-2016
Preview True-PDF (Reload/Scroll if blank)

YY 0502-2016: Joint replacement implants - Knee joint prostheses
YY 0502-2016
YY
PHARMACEUTICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.40
C 35
Replacing YY 0502-2005
Joint Replacement Implants – Knee Joint Prostheses
关节置换植入物 膝关节假体
ISSUED ON. JANUARY 26, 2016
IMPLEMENTED ON. JANUARY 01, 2018
Issued by. China Food and Drug Administration
Table of Contents
Foreword . 3
1 Scope .. 4
2 Normative References . 4
3 Terms and Definitions . 7
4 Classification and Dimension Marking . 7
5 Expected Performance . 7
6 Design Attributes .. 7
7 Materials . 7
8 Design Evaluation . 10
9 Manufacture . 12
10 Sterilization . 12
11 Package . 13
12 Information Provided by the Manufacturer .. 13
Appendix A (Normative) Approved Material Standard List on Manufacturing the
Knee Joint Prostheses . 14
Appendix B (Normative) Approved and Non-Approved Material List on
Manufacturing Articular Surface of Knee Joint Prostheses .. 16
Appendix C (Normative) Approved and Non-Approved Metal Combination List
on Non-Articular Contact Surface of Knee Joint Prostheses . 18
Appendix D (Normative) Approved Standard List for Chemical Analysis Method
. 19
Joint Replacement Implants – Knee Joint Prostheses
1 Scope
This Standard specifies the requirements for terms and definitions, classification and
dimension marking, expected performance, design attributes, materials, design
evaluation, manufacture, sterilization, package, and information provided by the
manufacturer of the knee joint prostheses.
This Standard is applicable to partial or total knee joint prostheses manufactured by
the materials and processes specified in this Standard.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 10610 Geometrical Product Specifications(GPS) - Surface Texture - Profile
Method - Rules and Procedures for the Assessment of Surface Texture
GB/T 14233.1 Test Methods for Infusion Transfusion Injection Equipment for
Medical Use - Part 1. Chemical Analysis Methods
GB/T 14233.2 Test Methods for Infusion, Transfusion, Injection Equipment for
Medical Use-Part 2. Biological Test Methods
GB/T 16886.7 Biological Evaluation of Medical Devices - Part 7. Ethylene Oxide
Sterilization Residuals
GB 18278 Sterilization of Health Care Products - Requirements for Validation and
Routine Control - Industrial Moist Heat Sterilization
GB 18279 Medical Devices - Validation and Routine Control of Ethylene Oxide
Sterilization
GB 18280 Sterilization of Health Care Products - Requirement for Validation and
Routine Control - Radiation Sterilization
GB/T 19701.1 Implants for Surgery-Ultra-High-Molecular-Weight Polyethylene-
Part 1. Powder Form
GB/T 19701.2 Implants for Surgery-Ultra-High-Molecular-Weight Polyethylene-
Part 2. Moulded Form
GB 23101.2 Implants for Surgery - Hydroxyapatite - Part 2. Coatings of
Hydroxyapatite
YY 0117.1 Implants for Surgery - Forgings, Castings for Bone Joint Prostheses -
Ti6Al4V Titanium Alloy Forgings
YY 0117.2 Implants for Surgery - Forgings, Castings for Bone Joint Prostheses-
ZTi6Al4V Titanium Alloy Castings
YY 0117.3 Implants for Surgery - Forgings, Castings for Bone Joint Prostheses
Cobalt Chromium Molybdenum Alloy Castings
YY/T 0343 Liquid Penetrant Inspection of Metallic Surgical Implants
YY/T 0772.3 Implants for Surgery Ultra-High-Molecular-Weight Polyethylene -
Part 3. Accelerated Ageing Methods
YY/T 0772.4 Implants for Surgery-Ultra-High-Molecular-Weight Polyethylene -
Part 4. Oxidation Index Measurement Method
YY/T 0772.5 Implants for Surgery Ultra-High-Molecular-Weight Polyethylene -
Part 5. Morphology Assessment Method
YY/T 0810.1 Implants for Surgery - Total Knee-Joint Prostheses - Part 1.
Determination of Endurance Properties of Knee Tibial Trays
YY/T 0811 Standard Guide for Extensively Irradiation-Cross-linked Ultra-High
Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
YY/T 0919 Non-Active Surgical Implants – Joint Replacement Implants – Specific
Requirements for Knee-Joint Replacement Implants
YY/T 0924.1 Implants for Surgery – Components for Partial and Total Knee Joint
Prostheses – Part 1. Classification, Definition and Designation of Dimensions
YY/T 0924.2 Implants for Surgery – Components for Partial and Total Knee Joint
Prostheses – Part 2. Articulating Surface Made of Metal, Ceramic and Plastic
Materials
ISO 6474-1 Implants for Surgery – Ceramic Materials – Part 1. Ceramic Materials
Based on High Purity Alumina
7.2 Metallic materials
7.2.1 The chemical composition of the metallic materials used for manufacturing the
knee joint prostheses shall conform to the provisions of corresponding standard.
7.2.2 The microstructure of the forgings shall conform to the provisions of
corresponding standard.
7.2.3 The mechanical properties shall conform to the provisions of corresponding
standard.
7.2.4 The internal quality of the castings shall conform to the provisions of
corresponding standard.
NOTE. when the material of knee joint prostheses adopts Ti6Al4V titanium alloy forgings,
ZTi6Al4V titanium alloy castings, cobalt chromium molybdenum alloy castings, its chemical
compositions, mechanical properties, the microstructure of the forgings, the internal quality of
the castings shall conform to the provisions of YY0117.1~0117.3.
7.3 UHMWPE material
7.3.1 The physical properties of conventional UHMWPE material used for
manufacturing the knee joint prostheses shall conform to the provisions of GB/T
19701.2; the content of impurity elements shall conform to the provisions of
GB/T19701.1. The manufacturers shall evaluate the oxidative stability (e.g.. oxidation
index and mechanical properties before and after aging) and morphology of the
conventional UHMWPE material according to the method given in YY/T 0772.3~YY
0772.5.
7.3.2 The manufacturer shall specify the performance index of extensively radiation-
cross-linked UHMWPE material according to the requirements of YY/T 0811.
7.4 Ceramic material
The physical and chemical properties of ceramic material used for manufacturing knee
joint prostheses shall conform to the provisions of ISO 6474-1, ISO 6474-2 or ISO
13356.
7.5 Coating material
7.5.1 Hydroxyapatite coating
The hydroxyapatite coating for knee joint prostheses shall conform to the provisions of
GB 23101.2.
7.5.2 Plasma sprayed metallic coating
8 Design Evaluation
8.1 General
The requirements of YY/T 0919 and the following contents are applicable to this
Standard.
8.2 Appearance
8.2.1 Metallic surface
When visually examining with normal or corrected vision, the metal part surface of
knee joint prostheses shall be free of oxide scales, knife marks, small gaps, scratches,
cracks, depressions, traps, sharp edges, burrs, and other defects; the surface shall
also be free of inlays, final processed deposits and other contaminants.
NOTE. for the metal parts with coatings, the manufacturer shall specify the requirements of
coating surface quality.
8.2.2 Plastic surface
When visually examining with normal or corrected vision, the articular surface of the
plastic parts of the knee joint prostheses shall be free from particulate contamination.
8.2.3 Ceramic surfac...