YY/T 0506.6-2009 English PDF (YYT0506.6-2009)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click YY/T 0506.6-2009
Historical versions: YY/T 0506.6-2009
Preview True-PDF (Reload/Scroll if blank)

YY/T 0506.6-2009: Surigical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Part 6: Test method to determine the resistance to wet bacterial penetration
YY/T 0506.6-2009
Surigical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Part 6. Test method to determine the resistance to wet bacterial penetration
ICS 11.040
C46
People's Republic of China Pharmaceutical Industry Standard
YY/T 0506-6-2009/ISO 22610..2006
Surgical sheets for patients, medical staff and instruments,
Surgical gowns and clean clothes
Part 6. Test method for penetration of moisture-resistant microorganisms
(ISO 22610..2006, IDT)
2009-06-16 released
2010--12-01 implementation
Issued by the State Food and Drug Administration
Foreword
YY/T 0506 "Surgical sheets, surgical gowns and clean clothes for patients, medical staff and instruments" consists of the following parts.
--- Part 1. General requirements for manufacturers, treatment plants and products;
--- Part 2. Performance requirements and performance levels;
--- Part 3. Test methods;
--- Part 4. Dry flocculation test method;
--- Part 5. Test method for blocking penetration of dry microorganisms;
--- Part 6. Test method for penetration of moisture-resistant microorganisms.
This part is the sixth part of YY/T 0506.
This part is equivalent to ISO 22610..2006 "Surgical drapes, surgical gowns and clean clothes for patients, medical staff and instruments to block wet bacteria
Penetration testing method ".
Appendix A, Appendix B and Appendix C of this part are normative appendices.
This part is under the jurisdiction of the Jinan Medical Device Quality Supervision and Inspection Center of the State Food and Drug Administration.
This part was drafted by Shandong Medical Device Product Quality Inspection Center.
The main drafters of this section. You Shaohua, Wang Wenqing, Hou Li, Wang Xin, Huang Jingchun.
YY/T 0506-6-2009/ISO 22610..2006
introduction
There are many examples showing that in the wet state, the liquid can carry bacteria to migrate to and pass through the barrier material. For example, skin flora
The wet penetration of the cover material.
The European Medical Device Guidelines clearly state that manufacturers are responsible for preventing device-related infectious diseases.
Users recommend products that require coordinated and approved international test methods.
The test methods described in this section use microbiological techniques and are therefore expected to be performed only in professional laboratories competent for such work.
Note. Due to the complexity of this method, it is not suitable for routine quality control.
YY/T 0506-6-2009/ISO 22610..2006
Surgical sheets for patients, medical staff and instruments,
Surgical gowns and clean clothes Part 6.
Test method for penetration of moisture-resistant microorganisms
Warning. The use of this part of YY 0506 may involve hazardous materials, operations and equipment. This section does not cover all of the standard uses
safe question. Before using this part, establish the corresponding safety and health operation specifications and determine the adaptability defined by the regulations is the user of this part
Responsibility.
1 Scope
This part of YY/T 0506 specifies a test method and related test equipment (see Appendix A), which can be used to determine the material in the
The ability to resist the penetration of bacteria in liquids during mechanical friction.
2 Normative references
The clauses in the following documents become the clauses of this part by citing this part of YY/T 0506. For all cited documents with dates,
All subsequent amendments (not including errata content) or revisions are not applicable to this section, however, agreement is encouraged based on this section
The parties concerned study whether the latest versions of these documents are available. For the cited documents without date, the latest version applies to this section.
GB/T 397.2. Tear performance of textile fabrics Part 2. Determination of tear strength of tongue-shaped specimens (GB/T 397.1-
2009, ISO 13937-2..2000, IDT)
GB/T 39233.1 Tensile properties of textile fabrics Part 1. Determination of breaking strength and breaking elongation strip method
(GB/T 3923.1-197, neq, ISO 13934-1..1994)
GB 6529 Standard atmosphere for humidity control and testing of textiles (GB/T 6529-2008, ISO 139..2005, MOD)
GB/T 8629 Home washing and drying procedures for textile testing (GB/T 8269-2001, eqv ISO 6330..2000)
GB 18278 Sterilization confirmation and routine control of medical and health care products require industrial wet heat sterilization (GB 18278-2000, idt
(ISO 11134..1994)
GB/T 19633 Packaging for terminally sterilized medical devices (GB/T 1963-2005, ISO 11607..1997, IDT)
YY/T 0287 is used in medical device quality management system for regulatory requirements (Y/T 0287-2003, ISO 13485..2003,
IDT)
GB/T 20367 Sterilization of medical and health care products Confirmation and routine control requirements of humid heat sterilization in medical and health care institutions
(GB/T 20367-2006, ISO 13683..1997, IDT)
ISO 15797 Textiles, Industrial Cleaning and Cleaning Procedures for Textile Workwear Testing
3 Terms and definitions
The following terms and definitions apply to this part of YY/T 0506.
3.1
Petri dish containing sterile nutrient agar medium.
Note. See Appendix B for the composition of the nutrient medium.
3.2
The material used to prepare the fungus slices.
YY/T 0506-6-2009/ISO 22610..2006
3.3
Materials used to cover patients, instruments, or specific surfaces, such as surgical drapes, to prevent fine skin bacteria and/or other non-sterile
The bacteria reached the surgical wound.
3.4
Material contaminated with a known number of test bacteria specified strain propagules.
3.5
A part of the instrument for detecting the penetration of wet bacteria, which is used to contact the bacterial plate and the test piece with the surface of the agar culture dish.
3.6
Complete evaluation of each test piece taken from the sample, including five petri dishes to count the bacterial slices directly, the sixth petri dish is used for estimation
The number of challenged bacteria remaining on the back of the test piece.
3.7
The test piece (25cm × 25cm) used to measure the penetration material of the moisture-resistant bacteria.
3.8
A standardized material used to assess the accuracy of a laboratory's wet penetration resistance bacteria penetration test.
3.9
Barrier properties to penetrate liquid carrying bacteria when subjected to mechanical friction.
4 Principle
Place the test piece on the agar Petri dish. Put a piece of bacteria with the same specifications (with the bacteria facing down) on the test piece, and then cover it with a thickness of about 10μm
The high-density polyethylene (HDPE) film uses two tapered steel rings to clamp the three layers of material together and apply a certain amount of tensile force. A wear test
The test finger is placed on the material and is used to apply the prescribed force to the bacterial patch and the test piece to bring the test piece into contact with the agar. The test refers to the rotation
The rotating rod acts on the material within 15 min in such a way that it can move across the surface of the culture dish. The tightness of the material assembly depends on the steel ring itself
Determine the weight to ensure that only a small area of the test piece is in contact with the agar surface at any one time.
After the test has been conducted for 15 min, replace it with a new agar petri dish, and repeat the test with the same bacterial slice and test piece.
Perform 5 sets of tests, each time operating 15min...