CNCA C01-01-2024 English PDF (CNCAC01-01-2024)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click CNCA C01-01-2024
Historical versions: CNCA C01-01-2024
Preview True-PDF (Reload/Scroll if blank)

CNCA C01-01-2024: China Compulsory Certification Implementation Rules - Wire and cable products
CNCA-C01-01:2024
CNCA / CCC
Serial No.: CNCA-C01-01:2024
China Compulsory Certification Implementation Rules -
Electrical Wires and Cables
ISSUED ON: APRIL 08, 2024
IMPLEMENTED ON: JULY 01, 2024
Issued by: Certification and Accreditation Administration of the People's
Republic of China
Table of Contents
0 Introduction ... 4
1 Application scope ... 4
2 Certification basis and standards ... 4
3 Certification mode ... 5
4 Division of certification units ... 5
5 Certification entrusting ... 5
5.1 Application and acceptance of certification entrusting ... 5
5.2 Application materials ... 6
5.3 Implementation arrangement ... 6
6 Certification implementations ... 6
6.1 Type test ... 6
6.2 Certification evaluation and decision ... 7
6.3 Time-limit of certification ... 8
7 After-certification supervision ... 8
7.1 After-certification follow-up inspection ... 8
7.2 Factory on-site sampling test or inspection... 8
7.3 Market sampling test or inspection ... 9
7.4 Frequency and time of after-certification supervision ... 9
7.5 Record of after-certification supervision ... 9
7.6 Evaluation of after-certification supervision results ... 9
8 Certificate ... 10
8.1 Maintenance of the certificate ... 10
8.2 Change of products covered by the certificate ... 10
8.3 Expansion of products covered by the certificate ... 10
8.4 Certificate’s cancellation, suspension and withdrawal ... 11
8.5 Use of the certificate ... 11
9 Certification mark ... 11
9.1 Permitted mark style ... 11
9.2 Use of deformed certification mark ... 11
9.3 Mark method ... 11
10 Charges... 12
11 Certification responsibility ... 12
12 Certification implementation detailed-rules ... 12
Attachment 1: Unit division of electrical wires and cables ... 14
Attachment 2: Supplementary requirements for flame-retardant wire and cable product
models ... 16
0 Introduction
This Rules is established based on the safety risk and certification risk of electrical wires and
cables. It stipulates the basic principles and requirements for the implementation of China
Compulsory Certification for electrical wires and cables.
This Rules can be used with other general rules issued by Certification and Accreditation
Administration (CNCA), such as “China Compulsory Certification Implementation Rules -
Manufacturing Enterprise Classification Management, Certification Mode Selection and
Determination”, “China Compulsory Certification Implementation Rules - Utilization of
Manufacturing Enterprise Testing Resource and Other Certification Results”, “China
Compulsory Certification Implementation Rules - Factory Quality Assurance Capability
Requirements” and “China Compulsory Certification Implementation Rules - Factory
Inspection General Requirements”.
The certification body shall make detailed-rules for certification according to the general
implementation rules and this Rules and implement them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of sustaining the
compliance with the certification.
1 Application scope
This Rules applies to electrical wires and cables which are listed in China Compulsory
Certification Implementation Rules. Due to the changes in the laws, regulations or related
product standards, technology, industry policies and other causes which may change the
applicable scope, the announcement released by CNCA shall be final and conclusive.
2 Certification basis and standards
In principle, the latest versions of above standards that are issued by the National
Standardization Administration shall be executed.
3 Certification mode
The basic certification mode of implementing the China Compulsory Certification for electrical
wires and cables is:
Type test + after-certification supervision;
Above “After-certification supervision” refers to 1 of the 3 modes - after-certification follow-
up inspection, factory on-site sampling test or inspection, or market sampling test or inspection.
The certification body shall follow the requirements of “China Compulsory Certification
Implementation Rules - Manufacturing Enterprise Classification Management, Certification
Mode Selection and Determination” to carry out the classification management to
manufacturing enterprise; consider the results of classification management; on the basis of
basic certification mode, appropriately add enterprise quality assurance capabilities and product
consistency inspection (initial factory inspection) and other relevant elements, and combine
supervision mode after certification, so as to determine the certification mode that is applicable
to the CLIENT.
4 Division of certification units
In principle, certification units are divided according to product type, model, etc. (see
attachment for details). For the same product produced by different manufacturers and the same
manufacturing enterprise, the type test can only be carried out on a sample of one unit. The
products of other manufacturers shall provide documents for conformity inspection.
Certification body shall clarify the specific requirements for unit division in the certification
implementation detailed-rules based on the relevant regulations and documents issued by
CNCA and the attachments to these rules, combined with the classification management of
production enterprises.
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in an appropriate
way. Certification body shall process the certification entrusting; and feedback the acceptance
or rejection according to the time limit in the certification implementation detailed-rules.
When it does not comply with national laws and regulations AND relevant industry policies,
the certification body must not accept the certification entrusting.
situation to certification body and handle accordingly.
According to relevant regulations and documents issued by CNCA, certification body shall, in
the certification implementation detailed-rules, define the “product critical components and raw
materials list” and relevant requirements.
For critical components and raw materials within the scope of the compulsory product
certificate purchased in the territory, the manufacturing enterprise shall provide the compulsory
product certificate. For critical components and raw materials within the scope of non-
compulsory product certificate, the certification body shall define the conditions and specific
requirements of voluntary product certificate or type test report that may be accepted or
recognized.
6.1.3 Items of type test
In principle, the items of type test shall include all applicable items specified in the product
standards.
6.1.4 Implementation of type test
In general, type test shall be conducted in the laboratory designated by CNCA. Laboratory shall
conduct the type test to the samples, integrally record the whole test and archive for retaining,
so that the test process and results are traceable.
On the premise of not affecting the validity of the certification results, certification body can
formulate corresponding management procedures according to “China Compulsory
Certification Implementation Rules - Utilization of Manufacturing Enterprise Testing Resource
and Other Certification Results”; use the testing resources of the manufacturing enterprise to
conduct test or witness test by the test personnel se...