FZ/T 81021-2014 English PDF (FZT81021-2014)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click FZ/T 81021-2014
Historical versions: FZ/T 81021-2014
Preview True-PDF (Reload/Scroll if blank)

FZ/T 81021-2014: Woven swimming wear
FZ/T 81021-2014
FZ
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 61.202
Y 76
Woven Swimming Wear
ISSUED ON. OCTOBER 14, 2014
IMPLEMENTED ON. APRIL 1, 2015
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and Definitions ... 5 
4 Requirements... 5 
5 Test Methods ... 13 
6 Inspection Classification Rules ... 17 
7 Marking, Packaging, Transportation and Storage ... 22 
Woven Swimming Wear
1 Scope
This Standard specifies all the technical characteristics of woven swimming wear, such
as requirements, test methods, inspection classification rules, and marking, packaging,
transportation and storage, etc.
This Standard is applicable to swimming wear and cap (primary fabric. textile woven
fabric).
This Standard is not applicable to swimming wear or cap for infants (age ≤ 36 months).
2 Normative References
The following documents are indispensable to the application of this Standard. In terms
of references with a specified date, only versions with a specified date are applicable
to this Standard. The latest version (including all the modifications) of references
without a specified date is also applicable to this Standard.
GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in
Color
GB/T 251 Textiles - Tests for Color Fastness - Grey Scale for Assessing Staining
GB/T 3921-2008 Textiles - Tests for Color Fastness - Color Fastness to Washing
with Soap or Soap and Soda
GB/T 4841.3 Color Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3,
1/6, 1/12, 1/25
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4. Textiles
and Apparel
GB/T 5714 Textiles - Tests for Color Fastness - Color Fastness to Sea Water
GB/T 8170 Rules of Rounding off for Numerical Values and Expression and Judgment
of Limiting Values
GB/T 8433-2013 Textiles - Tests for Color Fastness - Color Fastness to Chlorinated
Water (Swimming-pool Water)
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile
Testing
4.2.2 One-piece swimsuit shall indicate the suitable net height, net chest
circumference or net waist circumference (unit. cm).
Example. 170/95.
4.2.3 Split swimsuit shall indicate the suitable net height, net chest circumference or
net waist circumference (unit. cm). The tops of split swimsuit (with brassiere) shall
comply with stipulations in FZ/T 81020.
Example. A75.
4.2.4 Swimming pants shall indicate the suitable net height and net waist
circumference (unit. cm).
Example. 180/100.
4.2.5 The specification of swimming cap shall comply with stipulations in FZ/T 80010.
4.3 Raw Materials
4.3.1 Fabric
Fabrics that can comply with the quality requirements of this Standard shall be selected
in accordance with relevant national-level standards on fabric.
4.3.2 Lining
Linings that are suitable for all the fabrics and can comply with the quality requirements
of this Standard shall be adopted.
4.3.3 Accessories and Strings
Buttons, zippers and other accessories that are suitable for all the fabrics shall be
adopted; the surface of buttons shall be clean, smooth and impeccable. Accessories
shall have no defects, sharp points or edges; accessories shall not be deformed,
discolored, stained or rusty after being washed. Zippers shall be smooth and have
satisfying meshes. Strings that can comply with the quality requirements of this
Standard shall be adopted in accordance with relevant national-level standards on
textile products.
4.4 Color Difference
Color difference on the surface, and between the tops and bottoms of split swimsuit
shall be ≥ Level-4; color difference of linings shall be ≥ Level 3-4 (excluding special
design).
4.5 Appearance Defects
The allowable existence of defects on each part of finished products shall comply with
than 1/12 standard dyeing darkness shall be considered as light colors.
4.9.3 Only products with spliced dark and light colors shall be considered in washing
splicing and inter-staining. Color fastness to light shall not be assessed in fluorescent
color.
4.9.4 The assessment index of qualified products with color fastness to wet friction
resistance (dark fabric) is allowed to be half a level lower than this Standard.
4.9.5 Elastic fabric shall not be assessed in dimensional stability to washing, seaming
performance and breaking strength; seaming performance shall not be assessed in
the external decorative part.
4.9.6 Elastic elongation and tensile elastic recovery rate to chlorinated water
(swimming pool water) shall only be assessed in fabric and lining that contains
spandex fiber. Tensile elastic recovery rate to chlorinated water (swimming pool water)
shall not be assessed in split woven swimsuit. When the content of elastic fiber in fabric
or lining is < 8%, tensile elastic recovery rate to chlorinated water (swimming pool
water) shall not be assessed. Tensile elastic recovery rate to chlorinated water
(swimming pool water) shall only be assessed in elastic direction.
5 Test Methods
5.1 Test Instruments
5.1.1 Steel tap or ruler (division value. 1 mm).
5.1.2 Grey scale for assessing change in color (tests for color fastness) (GB/T 250).
5.1.3 Grey scale for assessing staining (tests for color fastness) (GB/T 251).
5.1.4 Color cards of standard depths for dyeing with dyestuffs 1/12 (GB/T 4841.3).
5.2 Specification Measurement of Finished Products
5.2.1 Specification of main parts of finished products shall comply with stipulation 4.2.
5.2.2 Allowable deviation of specification and dimension of finished products shall
comply with stipulation 4.7; methods of measuring the main parts shall comply with
stipulations in Table 6 and Figure 2 below.
Table 6 Unit. cm
No. Part Measurement Stipulations
1 Length
Measure from the highest part of front shoulder strap to the
bottom edge; strap-connected. measure from the highest
part of front body to the bottom edge.
2 Chest Horizontally measure the widest part of chest (calculated by
finished products, the sample card in GB/T 250 shall be adopted for comparison.
5.4 Physical and Chemical Performance Measurement
5.4.1 Dimensional stability to washing shall be determined in accordance with
stipulations in GB/T 8630; washing methods shall comply with Procedure 5A in GB/T
8629-2001. Hanging-to-dry shall be adopted as the mode of drying; 3 pieces of finished
products shall be randomly taken from the batch for tests; the average value of the 3
pieces shall be taken as the final result.
5.4.2 Color fastness to soaping of finished products shall be determined in accordance
with method A (1) in GB/T 3921-2008.
5.4.3 Color fastness to chlorinated water (swimming pool water) shall be determined
in accordance with stipulations in GB/T 8433-2013; effective chlorine concentration.
50 mg/L.
5.4.4 Color fastness to sea water shall be determined in accordance with stipulations
in GB/T 5714.
5.4.5 Elastic elongation test shall be conducted in accordance with 8.3.1 (25 N) in FZ/T
01034-2008.
5.4.6 Tensile elastic recovery rate to chlorinated water (swimming pool water).
a) Sample processing. randomly take 3 pieces of samples respectively in the
horizontal and vertical direction (effective working size. 10 cm x 5 cm). The
processing of samples shall comply with stipulations in ...