GB 14102-2005 English PDF (GB14102-2005)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 14102-2005
Historical versions: GB 14102-2005
Preview True-PDF (Reload/Scroll if blank)

GB 14102-2005: Fire resistant shutter
GB 14102-2005
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.220.20
C 82
Replacing GB 14102-1993
Fire Resistant Shutter
防火卷帘
ISSUED ON: APRIL 22, 2005
IMPLEMENTED ON: DECEMBER 1, 2005
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 7
4 Structural Diagram, Name Symbols and Codes ... 8
5 Classification ... 9
6 Requirements ... 11
7 Test Methods ... 18
8 Inspection Rules ... 26
9 Marking, Packing, Transportation and Storage ... 28
Appendix A (Normative) Requirements and Test Methods for Door Roller of
Fire Resistant Shutter ... 30
Appendix B (Normative) Requirements and Test Methods for Control Box of
Fire Resistant Shutter ... 36
Fire Resistant Shutter
1 Scope
This standard specifies definitions, classifications, requirements, test methods and
inspection rules as well as marking, packing, transportation and storage of fire
resistant shutter.
This standard is applicable to smoke-proof fire resistant shutters in industrial and civil
buildings.
Inorganic fiber composite fire resistant shutter specified in this standard is only
applicable to indoor well-ventilated dry place.
2 Normative References
The following standards contain provisions which, by reference in this text, constitute
provisions of this national standard. For dated reference, subsequent amendments
(excluding amending errors) to, or revisions of, any of these publications do not apply.
However, all parties coming to an agreement according to this standard are
encouraged to study whether the latest editions of these documents are applicable.
For any undated references, the latest editions of the documents referred to apply.
GB/T 1243 Short Pitch Transmission Precision Roller Chains and Chain Wheels
(GB/T 1243-1997, eqv ISO 606: 1994)
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T
2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of
Breaking Force and Elongation at Breaking Force - Strip Method (GB/T 3923.1-1997,
neq ISO/DIS 13934-1:1994)
GB 4717-1993 General Technical Conditions for Fire Alarm Control Units
GB/T 5454 Textiles - Burning behavior - Oxygen Index Method (GB/T 5454-1997,
neq ISO 4589:1984)
GB/T 5455 Textiles - Burning Behavior - Vertical Method
GB/T 5464 Non-combustibility Test Method of Building Materials (GB/T 5464-1999,
idt ISO 1182:1990)
GB/T 7633 Fire Resistance Tests - Door and Shutter Assemblies (GB/T 7633-1987,
eqv ISO 3008:1976)
GB 8624-1997 Classification for Burning Behavior of Building Materials and
Products
GB 9969.1 General Principles for Preparation of Instructions for Use of Industrial
Products
GB/T 14436 General Principles of Industrial Product Guarantee Documents
GB 15930-1995 Fire Dampers - Tests
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
Steel fire resistant shutter
A kind of shutter, consisted of curtain plate, guide rail, riser plate, lintel, box that are all
made of steel materials as well as matched door roller and control box, which meets
requirements on fire integrity
3.2
Inorganic fiber composite fire resistant shutter
A kind of shutter, consisted of curtain surface (with stainless steel wire or stainless
wire rope matched inside) made of inorganic fiber materials and clamp plate, guide
rail, riser plate, lintel and box that are all made of steel materials as well as matched
door roller and control box, which meets requirements on fire integrity
3.3
Special type fire resistant shutter
A kind of shutter, consisted of curtain surface made of inorganic fiber materials or
steel materials and guide rail, riser plate, clamp plate, lintel and box that are all made
6 Requirements
6.1 Appearance quality
6.1.1 Surface of metal parts of fire resistant shutter shall be free from crack,
indentation and obvious concave-convex, hammered mark, bur, missing hole and
other defects, and shall be evenly coated and plated for rust prevention; and shall be
free from peeling and flowing.
6.1.2 Inorganic fiber composite curtain surface of fire resistant shutter shall be free
from crack, broken corner, remedy, hole, inclination, jumper, breakage, visible
unevenness in density of wrap and weft, color difference and other defects; the clamp
plate shall be straight and fastened; warp direction of base cloth shall be the forced
direction of curtain surface that shall be beautiful, straight and tidy.
6.1.3 Relative moving parts in the process of cutting, bending and sinker drilling
shall be free from burrs.
6.1.4 Assembling and splicing points of all parts shall be free from misalignment;
welding point shall be fastened; and the appearance shall be flat and smooth, free
from slag inclusion, solder skips and loosening.
6.1.5 All fasteners shall be tightened and free from loosening.
6.2 Materials
6.2.1 Raw materials for inorganic fiber composite fire resistant shutter shall meet
requirements on health and environmental protection, and materials explicitly
prohibited by the State shall not be put into use.
6.2.2 Raw materials for main parts of fire resistant shutter shall meet the
requirements of corresponding national standards or professional standards.
6.2.3 Thickness of raw materials for main parts of fire resistant shutter should be
adopted in accordance with Table 5.
Table 5 -- Thickness of Raw Materials (Unit: mm)
Parts Thickness of raw materials
Curtain plate Thickness (ordinary type): ≥1.0; thickness of any curtain sheet
Clamp plate ≥3.0
Riser plate ≥3.0
Guide rail Buried type: ≥1.5; exposed type: ≥3.0
6.3.7.2 Surfaces of driving mechanism, bearing and chain shall be free from rust
and shall be added with proper amount of lubricant as required.
6.3.7.3 Deflection of shaft of vertical shutter under normal operation shall be less
than 1/400 of shaft length.
6.3.7.4 Shaft of side shutter shall be installed and vertical to foundation surface.
Error of verticality shall be less than 1.5 mm/m. The total length shall be less than
5mm.
6.3.8 Door roller
Door roller for fire resistant shutter shall be approved product qualified in the test
conducted by national fire detection organization and its performance shall be in
accordance with Appendix A.
6.3.9 Control box
Control box for fire resistant shutter shall be approved product qualified in the test
conducted by national fire detection organization and its performance shall be in
accordance with Appendix B.
6.4 Performance requirements
6.4.1 Air pressure resistance
6.4.1.1 Curtain plate of steel fire resistant shutter shall be of certain air pressure
resistant strength. At specified load, the curtain plate shall not fall off from the guide
rail and its deflection shall be in accordance with Table 8.
6.4.1.2 Anti-derail device may be arranged between the curtain surface and the
guide rail to prevent the plate from derailing.
6.4.2 Smoke-proof performance
6.4.2.1 Smoke control device for guide rail and lintel of fire resistant and smoke
control shutter shall be in accordance with 6.3.4.5 and 6.3.5.1.