GB 14536.1-2008 English PDF (GB14536.1-2008)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 14536.1-2008
Historical versions: GB 14536.1-2008
Preview True-PDF (Reload/Scroll if blank)

GB 14536.1-2008: [GB/T 14536.1-2008] Automatic electrical controls for household and similar use -- Part 1: General requirements
GB 14536.1-2008
Automatic electrical controls for household and similar use.Part 1. General requirments
ICS 29.120.60
K32
National Standards of People's Republic of China
Replacing GB 14536.1-1998
Household and similar electrical automatic controller
Part 1. General requirements
(IEC 60730-1.2003 (Ed3.1), IDT)
Posted 2008-03-24
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
IEC Introduction Ⅴ
1 Scope and normative references 1
2 Definition 3
3 General requirements 19
4 General notes 19
5 21 ratings
6 Category 21
7 Profile 26
8 Protection against electric shock 31
9 ground protection measures 33
10 Terminals and terminations 35
Structural requirements 11 40
Moisture and dust 12 49
13 Electric strength and insulation resistance 51
14 Fever 53
15 Manufacturing deviation and drift 57
16 58 Environmental Stress
17 58 Durability
Mechanical strength 18 64
19 Threaded parts and connections 68
20 creepage distances, clearances and distances through solid insulation through 70
21 heat, fire and tracking-resistant 76
Corrosion 22 79
23 Electromagnetic compatibility (EMC) emission requirements --- 79
24 Components 79
25 normal operation 80
26 Electromagnetic compatibility (EMC) requirements --- Immunity 80
27 non-normal operation 80
28 Guidelines for the use of electronic disconnecting 80
Appendix A (normative) logo wear 97
Appendix B (normative) creepage distances and clearances are measured in the air 99
Annex C (normative) Test with a mercury switch 103 cotton
Annex D (normative) heat, fuel and tracking 104
Appendix E (normative) measuring the leakage current of the circuit 119
Annex F (informative) Heat and fire classification 120
Annex G (normative) heat and flame test 121
Requirements Annex H (normative) electronic controller 123
Requirements Appendix J (normative) thermistor controller 157
Annex K (normative) in different ways through the power supply voltage control system of nominal voltage 161
Annex L (normative) Overvoltage category 163
Annex M (informative) Typical usage 164
Annex N (normative) Pollution Level 165
Appendix P (normative) Performance test printed circuit board coating 166
Appendix Q (normative) Performance test printed circuit board coating 167
NOTE Annex R (informative) Surge Immunity Test 169
Annex S (informative) Chapter 20 Application guide 172
Index 174
Figure 1 test pin 81
Figure 2 standard test finger 81
Figure 3 Test nails 82
Figure 4 Vertical impact test controller 82
5 drum 83
6 Ball pressure test device 83
Figure 7 horizontal burning test 84
Figure 8 label durability test equipment 84
9 bending test equipment 85
FIG. 10 screw terminals and screw terminal 86
11 cylindrical terminal 87
12 cap-shaped terminal 88
Figure 13a) saddle-shaped terminal 89
Fig. 13b) terminal lug 89
Figure 14 inserts 89
15 connector inserts can not reverse 91
16 sets of 92 plug
17 creepage distances and clearances measured 93
Figure 25 Measurement Ⅱ class controller when connected to single-phase wiring diagram for leakage current at operating temperature 94
26 measuring non-Ⅱ type controller when connected to single-phase wiring diagram for leakage current at operating temperature 94
Figure 27 Measurement Ⅱ class controller leakage current at the time of the three-phase connection diagram 95 at operating temperature
28 measuring non-Ⅱ type controller leakage current at the time of the three-phase connection diagram 95 at operating temperature
29 measuring non-Ⅱ type controller when connected to single-phase wiring diagram for leakage current at operating temperature 96
30 non-Ⅱ leakage current is measured in the second class controllers are connected to the three-phase grounded-neutral power connections at operating temperatures
Line 96
Foreword
All technical content in this section is mandatory.
GB 14536 "Household and similar electrical automatic controller" is divided into two parts.
Part 1. General requirements
Part 2. Particular requirements
Special requirements and consists of the following components.
GB 14536.3 thermal motor protection Particular requirements (idt IEC 60730-2-2);
Particular requirements GB 14536.4 tubular fluorescent lamp ballasts for thermal protectors (idt IEC 60730-2-3);
GB 14536.5 sealed and semi-hermetic motor - compressor motor thermal protection Particular requirements (idt IEC 60730-2-4);
GB 14536.6 Particular requirements for automatic electrical burner control systems (idt IEC 60730-2-5);
GB 14536.7 pressure sensitive electrical controls - Particular requirements (idt IEC 60730-2-6);
GB 14536.8 timers and time switches - Particular requirements (idt IEC 60730-2-7);
GB 14536.9 Particular requirements for electrically operated water valves (including mechanical requirements) (idt IEC 60730-2-8);
GB 14536.10 - Particular requirements for temperature sensing controls (idt IEC 60730-2-9);
Particular requirements for starting relays (idt IEC 60730-2-10) GB 14536.11 motors;
GB 14536.12 Particular requirements for energy regulators (idt IEC 60730-2-11);
GB 14536.13 Particular requirements for electrically operated door locks (idt IEC 60730-2-12);
GB 14536.14 - Particular requirements for household washing machine controller;
GB 14536.15 Particular requirements for humidity sensing controls (idt IEC 60730-2-13);
GB 14536.16 Particular requirements for electric actuators (idt IEC 60730-2-14);
GB 14536.17 special requirements of the float or electrode-sensitive automatic electrical water level sensing controller used in the boiler appliance (idt
IEC 60730-2-15);
Particular requirements GB 14536.18 household and similar float type level controller (idt IEC 60730-2-16);
GB 14536.19 Particular requirements for electrically operated gas valves, including mechanical requirements (idt IEC 60730-2-17)
This section is equivalent to using the International Electrotechnical Commission IEC 60730-1.2003 (3.1 Edition) "Household and similar electrical automatic control
Part is 1. General requirements. "
Structure of this part of IEC 60730-1.2003 is identical. In this section, there is a corresponding national standards, national standards incorporated by reference
Quasi; no national standards, IEC standards are incorporated by reference outlined. Part 2 Normative arrangement with sequential file
Different IEC 60730-1.
For ease of use, this section made the following editorial changes.
a) "This standard" be replaced by "this section";
b) use a decimal point instead of a decimal comma ",". ",";
c) increase the national standard foreword.
This Part replaces GB 14536.1-1998 "Household and similar electrical controls - Part 1. General requirements"
(Idt IEC 730-1.1993).
This section compared with GB 14536.1-1998 main changes are as follows.
a) an increase of Annex K, Appendix L, Appendix M, Appendix N, Appendix P, Appendix Q, Appendix R, Appendix S;
b) In Chapter 17, the Chinese used instead of the overload test pressure test;
c) In Chapter 23, Chapter 26, Appendix H changed greatly;
d) "in some countries" to name specific countries.
This section of the Appendix A, Appendix B, Appendix C, Appendix E, Appendix G, Appendix H, Appendix J, Appendix L, Appendix N, Appendix P, Q is the Appendix
Normative Appendix; Appendix D, Appendix F, Appendix K, Appendix M, Appendi...