GB/T 32007-2015 English PDF (GBT32007-2015)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 32007-2015
Historical versions: GB/T 32007-2015
Preview True-PDF (Reload/Scroll if blank)

GB/T 32007-2015: Unified coding and identification for auto parts
GB/T 32007-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 35.040
A 24
Unified Coding and Identification for Auto Parts
ISSUED ON. SEPTEMBER 11, 2015
IMPLEMENTED ON. JANUARY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and Definitions ... 5 
4 Coding ... 6 
5 Symbols ... 7 
6 Symbol’s Position ... 8 
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee for Standardization of Article Numbering and Identification
(SAC/TC 287).
Drafting organizations of this Standard. Article Numbering Center of China, Automatic
Identification Manufacture Association of China, Shanghai Institute of Standardization,
Shandong Institute of Standardization, Beijing Jingcheng Bar-code Tech. Co., Ltd.,
Shanghai Chenda Wulian Network Technology Co., Ltd., China Automotive
Maintenance and Repair Trade Association Auto Repair Parts Committee, Zhejiang
Article Numbering Center, Chongqing Institute of Standardization, Lifan Industry
(Group) Co., Ltd. Auto Institute, Shanghai Tongyou Automation Technology Co., Ltd.,
Hubei Institute of Standardization, and Wuhan Huagong Laser Engineering Co., Ltd.
Chief drafting staffs of this Standard. Xie Ying, Xi Zhudong, Su Guanqun, Yan
Hongsheng, Chen Yixin, Wei Tongwei, Zhang Peng, Xu Gaoqing, Chen Zhenyu,
Quan Qin, Zhang Guofu, Yang Jianming, and Xu Jun.
Unified Coding and Identification for Auto Parts
1 Scope
This Standard specifies the coding principles, data structures, notation methods, and
its general position rules of the unified coding (hereinafter referred to as “coding”) for
auto parts.
This Standard is applicable to the preparation of the unified coding and identification
for auto parts; it is used for information acquisition and data exchange for auto parts.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 12905 Bar Coding Terminology
GB/T 14258 Information Technology - Automatic Identification and Data Capture
Techniques - Verification of Print Quality of Bar Code Symbols
GB/T 15425-2014 Bar Code for Commodity - 128 Bar Code
GB/T 16986-2009 Bar Code for Commodity - Application Identifier
GB/T 18284 QR Code
GB/T 21049 Chinese-Sensible Code
GB/T 23704 Information Technology - Automatic Identification and Data Capture
Techniques - Bar Code Print Quality Test Specification - Two-Dimensional Symbols
ISO/IEC 16022 Information Technology – Automatic Identification and Data
Capture Techniques – Data Matrix Bar Code Symbology Specification
ISO/IEC TR 29158 Information Technology – Automatic Identification and Data
Capture Techniques – Direct Part Mark (DPM) Quality Guideline
3 Terms and Definitions
The following terms and definitions defined in GB/T 12905 are applicable to this
document.
3.1 Global Trade Item Number (GTIN)
Application identifier 01 consists of 14 digits, which is globally unique identification
code for trade items (including products and services).
3.2 Parts number
Auto parts manufacturers make the physical numbers against their manufactured
parts, which also includes the management numbers determined due to the
technology, manufacture and management demands of the manufacturers, the
application identifier is 240.
3.3 Parts lot
Code of parts of the belonged batch, application identifier is 10, which is expressed by
a group of digits, letters or combinations.
3.4 Part serial number
Uniquely identify the running number of single-piece of certain kind of parts in the
same batch, application identifier is 21, which is expressed by a group of digits, letters,
and combination of digits.
3.5 Supply code in customer plant
Customer distributes the internal vendor code to the supplier, application identifier is
92, which is expressed by a group of digits or letters.
3.6 Spare parts code in customer plant
Customer provides the spare parts codes for the products supplied by the supplier,
application identifier is 241, which is expressed by a group of digits or letters.
3.7 Customer purchase code
Parts purchasing order code, application identifier is 400, which is expressed by a
group of digits or letters.
3.8 Direct Part Mark (DPM)
A preparation technology marked directly on the part surface; it does not require
marking carriers such as paper or label, which is also called body identification.