QB/T 2660-2004 English PDF (QBT2660-2004)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QB/T 2660-2004
Historical versions: QB/T 2660-2004
Preview True-PDF (Reload/Scroll if blank)

QB/T 2660-2004: Skin tonic
QB/T 2660-2004
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.70
Classification No.: Y42
Record No.: 15117-2005
Replacing QB/T 2660-1994
Skin tonic
化妆水
ISSUED ON: DECEMBER 14, 2004
IMPLEMENTED ON: JUNE 01, 2005
Issued by: National Development and Reform Commission of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Product Classification ... 5
4 Requirements ... 5
5 Test Methods ... 6
6 Inspection Rules ... 7
7 Marking, Packaging, Transportation, Storage and Shelf Life ... 7
Skin tonic
1 Scope
This Standard specifies the product classification, requirements, test methods,
inspection rules and marking, packaging, transportation and storage of skin tonic.
This Standard applies to water-based skin care products that supplement the water
needed by the skin and protect the skin.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB 5296.3 Instruction for Use of Consumer Products - General Labelling for
Cosmetics
GB/T 13531.1 General Methods on Determination of Cosmetics - Determination
of pH
GB/T 13531.4 General Methods on Determination of Cosmetics – Determination
of Relative Density
QB/T 1684 Inspecting Rules for Cosmetics
QB/T 1685 Requirements of Packaging Appearance for Cosmetic Products
JJF 1070-2000 The Rules of Metrological Inspection for Net Content of
Prepackaged Commodity with Fixed Content
Measures for Metrological Supervision and Administration of Quantitative Packed
Commodities -- issued by State Bureau of Technical Supervision -- [1995] Order
No.43
No.229 WFJF [2002] Hygienic Specifications for Cosmetics
5.3 Physical-chemical indicators
5.3.1 Heat-resistant
5.3.1.1 Instrument
Constant temperature incubator: the temperature shall be controlled at ±1°C.
5.3.1.2 Operation procedure
Adjust the constant temperature incubator to (40 ± 1) °C in advance; and place a bottle
of the completely-packaged specimen in the constant temperature incubator. Take it
out after 24h, restore to room temperature and examine visually.
5.3.2 Cold-resistant
5.3.2.1 Instrument
Constant temperature incubator: the temperature shall be controlled at ±1°C.
5.3.2.2 Operation procedure
Adjust the constant temperature incubator to (5 ± 1) °C in advance; and place a bottle
of the completely-packaged specimen in the constant temperature incubator. Take it
out after 24h, restore to room temperature and examine visually.
5.3.3 pH
It shall be tested according to the method specified in GB/T 13531.1 (direct
measurement method).
5.3.4 Relative density
It shall be tested according to the method specified in GB/T 13351.4.
5.4 Deviation of net content
It shall be tested according to the method specified in 6.1.1 of JJF 1070-2000.
6 Inspection Rules
It shall be implemented as per QB/T 1684.
7 Marking, Packaging, Transportation, Storage and