GB 14536.10-2008 English PDF (GB14536.10-2008)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 14536.10-2008
Historical versions: GB 14536.10-2008
Preview True-PDF (Reload/Scroll if blank)

GB 14536.10-2008: [GB/T 14536.10-2008] Automatic electrical controls for household and similar use -- Particular requirements for temperature sensing controls
GB 14536.10-2008
Automatic electrical controls for household and similar use.Particular requirements for temperature sensing controls
ICS 29.130
K09
National Standards of People's Republic of China
Replacing GB 14536.10-1996
Household and similar electrical automatic controller
Particular requirements for temperature sensing controls
(IEC 60730-2-9.2004 (Ed2.2), IDT)
Posted 2008-09-19
2009-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
IEC Introduction Ⅴ
1 Scope and normative references 1
2 Definitions 1
3 3 General requirements
4 General notes 3
Rating 4 5
6 Category 4
Profile 4 7
8 5 Protection against electric shock
9 ground protection measures 5
10 Terminals and terminations 6
11 structural requirements 6
8 12 moisture and dust
13 Electric strength and insulation resistance 8
Fever 14 9
15 Manufacturing deviation and drift 9
16 10 Environmental Stress
17 10 Durability
Mechanical strength 18 13
19 Threaded parts and connections 14
20 creepage distances, clearances and distances through solid insulation through 14
21 heat, fire and tracking-resistant 14
Corrosion 22 15
23 Electromagnetic compatibility (EMC) emission requirements --- 15
24 assembly 15
25 normal operation 15
26 Electromagnetic compatibility (EMC) requirements --- Immunity 15
27 non-normal operation 15
28 Guidelines for the use of electronic disconnecting 15
Appendix 16
Annex C (normative) mercury switch test cotton 16
Annex D (informative) heat, fuel and tracking 16
Requirements Annex H (normative) electronic controller 16
Requirements Appendix J (normative) thermistor controller 19
Annex AA (informative) Maximum manufacturing deviation and drift 20
Appendix BB (informative) time constant 21
Number 23 Annex CC (informative) controller and standalone installations with wire controller cycle
Appendix DD (normative) agricultural greenhouses by the controller 24
Foreword
All technical content in this section is mandatory.
GB 14536 "Household and similar electrical automatic controller" is divided into two parts.
Part 1.
GB 14536.1 General requirements
Part 2.
GB 14536.3 - Particular requirements for thermal motor protectors
Particular requirements GB 14536.4 tubular fluorescent lamp ballasts thermal protectors
GB 14536.5 sealed and semi-hermetic motor compressor motor - Particular requirements for thermal protectors
GB 14536.6 Particular requirements for automatic electrical burner control systems
GB 14536.7 pressure sensitive Particular requirements for electrical controls
GB 14536.8 Particular requirements for timers and time switches
GB 14536.9 Particular requirements for electrically operated water valves (including mechanical requirements)
GB 14536.10 - Particular requirements for temperature sensing controls
GB 14536.11 Particular requirements for motor starting relays
GB 14536.12 - Particular requirements for energy regulators
GB 14536.13 Particular requirements for electrically operated door locks
GB 14536.14 - Particular requirements for household washing machine controller
GB 14536.15 Particular requirements for humidity sensing controls
GB 14536.16 Particular requirements for electric actuators
Special requirements of the float or electrode-sensitive automatic electrical water level sensing controller GB 14536.17 in boiler used
GB 14536.18 float type for household and similar use Particular requirements for water level controller
GB 14536.19 Particular requirements for electrically operated gas valves, including mechanical requirements
This section is equivalent to using the International Electrotechnical Commission IEC 60730-2-9.2004 (Version 2.2) "household and similar use automatic control
Part is 2-9. Particular requirements for temperature sensing controls. "
For ease of use, this section made the following editorial changes.
a) "The 2-9" be replaced by "this section";
b) use a decimal point instead of a decimal comma ",". ",";
c) increase the national standard foreword.
This Part replaces GB 14536.10-1996 "household and similar use Particular requirements for electrical controls for temperature sensing controls"
(Idt IEC 60730-2-9.1992).
Compared with GB 14536.10-1996 part of the main changes are as follows.
a) The addition of appendix J, Appendix DD;
b) In Chapter 17, the Chinese used instead of the overload test pressure test;
c) In Chapter 23, Chapter 26, Appendix H changed greatly;
d) "in some countries" to name specific countries.
This section should be GB 14536.1-2008 (identical with IEC 60730-1.2003) with the use, if the version of the difference may be due
Can cause problems when used in this section, you should refer to the appropriate version of the original IEC standard.
This part of the Appendix C, Appendix H, Appendix J, Appendix DD normative appendix; Appendix D, Appendix AA, Appendix BB, CC is owned Appendix
Material appendix.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee household automatic control (SAC/TC212) centralized.
This section drafted by. China Electric Apparatus Research Institute, Ltd. Foshan Tongbao.
Participated in the drafting of this section. Strix (Guangzhou) Electric Co., Ltd., Shunde District of Foshan City Electric Industrial Co., Ltd. Miharu, Guangzhou
Household appliances detection, Jiangsu Baoying electrical plant, Zhejiang Yan Thermostat Ltd., Guangdong Kelon Electrical Holdings Company Limited, Emerson Electric
(Shenzhen) Co., Ltd., Zhuhai Gree Electric Appliance Co., Ltd., Foshan City, Kowloon machine (thermostat) Factory, China Games Po (Headquarters) laboratory, rather
CIQ wave electrical safety testing center, Shanghai Exit Inspection and Quarantine.
Drafters of this section. Huang Kaiyun, wheat harvest, Cheung your left, Shao Zhicheng, hole Rui Xun, Yang wind and thunder, Chen Yonglong, HUANG Xiao-feng, Li Qin Wei, Zhang and Zhu
Zhou Yang, Xu Shaohui, Sun Guangjiong, Gan Hongsheng.
This part of the standard replaces the previous editions are.
--- GB 14536.10-1996.
IEC Foreword
1) The International Electrotechnical Commission (IEC ) is a worldwide standardization group composed of all national electrotechnical committees (IEC National Committees)
Organizations. The object of IEC is to promote international cooperation in the countries electricians and standardized electronic field all questions. For this purpose
IEC addition to other activities, but also publishes International Standards, technical specifications, technical reports and guidelines (hereinafter referred to as "IEC
Publications "). The formulation of these publications is entrusted to technical committees to complete any IEC National Committee, as long as
Interested in this technique, may participate in this preparatory work. Liaising with the IEC international, governmental and non-governmental organizations
Also participate in this work. IEC and the International Organization for Standardization (ISO ) in accordance with the conditions specified in the agreement, close cooperation.
2) IEC IEC National Committees on technical issues formal decisions or agreements of particular concern on this issue with all the skills to participate
Technique developed by the Commission and, where possible expressed consensus on the issues involved in the international arena.
3) IE...