GB 14536.11-2008 English PDF (GB14536.11-2008)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 14536.11-2008
Historical versions: GB 14536.11-2008
Preview True-PDF (Reload/Scroll if blank)

GB 14536.11-2008: [GB/T 14536.11-2008] Automatic electrical controls for household and similar use -- Particular requirements for motor-starting relays
GB 14536.11-2008
Automatic electrical controls for household and similar use.Particular requirements for motor-starting relays
ICS 29.130.20
K32
National Standards of People's Republic of China
GB 14536.11-2008/IEC 60730-2-10.2006
Replacing GB 14536.11-1996
Household and similar electrical automatic controller
Particular requirements for motor starting relays
(IEC 60730-2-10.2006, IDT)
Posted 2008-12-30
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
IEC Introduction Ⅴ
1 Scope and normative references 1
2 Definitions 1
3 General requirements 1
4 General notes 2
Rating 2 5
6 Category 2
7 Profile 2
8 Protection against electric shock 2
9 ground protection measures 2
10 Terminals and terminations 2
11 structural requirements 3
12 moisture and dust 3
13 Electric strength and insulation resistance 3
14 heat 3
15 Manufacturing deviation and drift 3
3 16 Environmental Stress
Durability 17 3
The mechanical strength of 18 3
19 Threaded parts and connections 3
20 creepage distances, clearances and distances through solid insulation through 3
21 heat, fire and resistance to tracking 3
Corrosion resistance of 22 3
23 Electromagnetic compatibility (EMC) emission requirements --- 4
24 assembly 4
25 Normal operation 4
26 Electromagnetic compatibility (EMC) requirements --- immunity 4
27 non-normal operation 4
28 Guidelines for the use of electronic disconnect 4
Figure 5
Appendix 6
Annex C (normative) mercury switch test cotton 6
Appendix E (normative) leakage current measurement circuit 6
Annex H (normative) requirements for electronic controllers 7
GB 14536.11-2008/IEC 60730-2-10.2006
Foreword
All technical content in this section is mandatory.
GB 14536 "Household and similar electrical automatic controller" is divided into two parts.
--- Part 1. General requirements;
--- Part 2. Particular requirements.
Special requirements and consists of the following components.
--- GB 14536.3 - Particular requirements for thermal motor protectors (IEC 60730-2-2, IDT);
--- Particular requirements GB 14536.4 tubular fluorescent lamp ballasts for thermal protectors (IEC 60730-2-3, IDT);
--- GB 14536.5 sealed and semi-hermetic motor - compressor motor thermal protection Particular requirements (IEC 60730-2-4,
IDT);
--- Particular requirements GB 14536.6 automatic electrical burner control systems (IEC 60730-2-5, IDT);
--- GB 14536.7 pressure sensitive electrical controls - Particular requirements (idt IEC 60730-2-6);
--- GB 14536.8 Particular requirements for timers and time switches (idt IEC 60730-2-7);
--- GB 14536.9 Particular requirements for electrically operated water valves (including mechanical requirements) (IEC 60730-2-8, IDT);
--- GB 14536.10 - Particular requirements for temperature sensing controls (IEC 60730-2-9, IDT);
--- GB 14536.11 Particular requirements for motor starting relays (IEC 60730-2-10, IDT) used;
--- GB 14536.12 Particular requirements for energy regulators (idt IEC 60730-2-11);
--- GB 14536.13 Particular requirements for electrically operated door locks (IEC 60730-2-12, IDT);
--- GB 14536.15 Particular requirements for humidity sensing controls (IEC 60730-2-13, IDT);
--- GB 14536.16 Particular requirements for electric actuators (idt IEC 60730-2-14);
--- GB 14536.17 special requirements of the float or electrode-sensitive automatic electrical water level sensing controller used in the boiler appliance
(IEC 60730-2-15, IDT);
--- GB 14536.18 - Particular requirements for household and similar use of the float type level controllers (IEC 60730-2-16, IDT);
--- GB 14536.19 Particular requirements for electrically operated gas valves, including mechanical requirements (IEC 60730-2-17, IDT);
--- GB 14536.20 Particular requirements for water and air flow sensing controls, including mechanical requirements (IEC 60730-2-18, IDT);
--- GB 14536.21 Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19, IDT);
This section identical with IEC 60730-2-10.2006 "Household and similar electrical controls - Part 2. motor starting
Particular requirements for the relay. "
Part of this structure with IEC 60730-2-10.2006 same. In this section, there is a corresponding national standards, national standards incorporated by reference
Quasi; no national standards, IEC standards are incorporated by reference outlined.
For ease of use, this section made the following editorial changes.
a) "This standard" be replaced by "this section";
b) use a decimal point instead of a decimal comma ",". ",";
c) increase the national standard foreword.
This part of GB 14536.1-2008 "Household and similar electrical controls - Part 1. General requirements" in conjunction.
This Part replaces GB 14536.11-1996 "Household and similar electrical controls for motor starting relays to
begging".
Compared with GB 14536.11-1996 part of the main changes are as follows.
GB 14536.11-2008/IEC 60730-2-10.2006
--- Several sections according to the change of the name of GB 14536.1 made the appropriate changes;
--- Chapter 1 apply to rated voltage range according to the general asked to do modified accordingly;
--- Chapter 27 of the test contents are different;
Appendix H --- changing requirements.
This part of the Annex C, Annex E and Annex H normative appendix.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee household automatic control (SAC/TC212) centralized.
This section is drafted. Guangzhou CVC Testing Institute, Guangzhou Electric Apparatus Research Institute, Wanbao Refrigeration Group Guangzhou Electrical Appliance Co.,
Division Hangzhou Star Shuai Seoul Electric Co., Ltd. Foshan Tongbao, Lanxi City, the Electric Appliance Co., Ltd. Zhejiang Yan thermostat limited
The company, Shunde District of Foshan City, Yung your measurement Electric Co. Ltd., China Household Electrical Appliances Research Institute.
Drafters of this section. Core hole Xun, Zhu Liping, Huang Kaiyun, Huang Zhi Hang, Lu Wencheng, wheat harvest, high Yonghua, Chen Yonglong, Hedun Qi, Gu Yulin.
This part of the standard replaces the previous editions are.
--- GB 14536.11-1996.
GB 14536.11-2008/IEC 60730-2-10.2006
IEC Foreword
1) IEC (International Electrotechnical Commission) is a worldwide standardization group composed of national electrotechnical committees (IEC National Committees)
Organizations. The object of IEC is to promote international cooperation on issues related to the standardization of the electrical and electronic fields. For this purpose
IEC addition to other activities, but also publishes International Standards, technical specifications, technical reports, public specification (PAS, Publicly
AvailableSpecifications) and guidelines (henceforth referred to IEC publication). Their preparation is entrusted to technical
Commission to complete. As a member of IEC National Committees, as long as the interest of the standard to be developed, may participate
Its formulation. Liaising with the IEC 's international, official or unofficial organizations are also involved in the development of standards.
IEC and the World Organization for Standardization (ISO ) in accordance with the conditions specified in the agreement, close cooperation.
2) since each technical committee has re...