MT/T 661-2011 English PDF (MT/T661-2011)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click MT/T 661-2011
Historical versions: MT/T 661-2011
Preview True-PDF (Reload/Scroll if blank)

MT/T 661-2011: General technical condition for electrical apparatus used underground mine
MT/T 661-2011
MT
COAL INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 73.100.99
D 98
Registration number. 31797-2011
Replacing MT/T 661-1997
General technical condition for electrical
apparatus used underground mine
ISSUED ON. APRIL 12, 2011
IMPLEMENTED ON. SEPTEMBER 01, 2011
Issued by. State Administration of Production Safety
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Classification ... 7 
4 General requirements ... 7 
5 Technical requirements ... 9 
6 Test methods ... 27 
7 Inspection... 30 
8 Marking, packaging, transport and storage ... 31 
Appendix A (Normative) Classification of electrical apparatus for underground
coal mine ... 33 
Appendix B (Normative) Main inspection items for electrical apparatus used in
underground coal mines ... 36 
Appendix C (Normative) Standard clauses of the corresponding provisions cited
in various inspection items for electrical apparatus used in underground coal
mines ... 38 
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of MT/T 661-1997 “General technical condition for
electrical apparatus used underground mine”.
From the date of implementation of this standard, MT/T 661-1997 “General
technical condition for electrical apparatus used underground mine” is
abolished.
As compared with MT/T 661-1997, the main changes in this standard are as
follows.
- DELETE the description on the normative references in the foreword (see
the foreword of the 1997 version);
- DELETE the test requirements for transport (see 5.1.9 of the 1997 version);
- MODIFY the classification of electrical apparatus (see Appendix A; clause
3 of the 1997 version);
- ADJUST the structural layout as required for the insulation resistance value
(see Table 11 and Table 12; Table A.1 of the 1997 version);
- MODIFY the provisions for the selection of electrical apparatus for
underground mine;
- MODIFY the electric clearance and creepage distances (see Table 3; Table
5 of the 1997 version);
- MODIFY the tracking resistance of insulating materials (see Table 4; Table
6 of the 1997 version);
- MODIFY the overload protection characteristics of the starter (see Table 17;
Table 7 of 1997 version);
- MODIFY the rated lightning impulse withstanding voltage (see Table 8;
Table 9 of the 1997 version);
- MODIFY the rated short-time power frequency withstanding voltage of high-
voltage electrical apparatus (see Table 10; Table 11 of the 1997 version);
- ADD the color of the main circuit conductor as well as the arrangement of
the phase sequence of the main circuit (see 5.2.16 and 5.2.17);
- ADD the performances of phase failure protection and leakage blocking
protection (see Table 18 and Table 19).
General technical condition for electrical
apparatus used underground mine
1 Scope
This standard specifies the classification, technical requirements, test methods,
inspection rules, marking, packaging, transportation and storage of electrical
apparatus used underground mines.
This standard applies to electrical apparatus used underground mines (referred
to as electrical apparatus).
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 156 Standard voltages
GB/T 191 Packaging - Pictorial marking for handling of goods
GB 311.1 Insulation co-ordination for high voltage transmission and
distribution equipment
GB/T 762 Standard current level
GB 1984 High-voltage alternating-current circuit-breakers
GB 1985 High-voltage alternating-current disconnectors and earthing
switches
GB/T 2423.1 Environmental testing for electric and electronic and electronic
products - Part 2. Test methods - Tests A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products - Part
2. Test methods - Tests B. Dry heat
GB/T 3309 Mechanical test at ambient temperature for high-voltage
switchgear
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres - Part
1. General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres - Part
2. Flameproof enclosure d
GB 3836.3 Electrical apparatus for explosive gas atmospheres - Part 3.
Increased safety e
GB 3836.4 Electrical apparatus for explosive gas atmospheres - Part 4.
Intrinsic safety i
GB/T 4026 Basic and safety principles for man-machine interface, marking
and identification - Identification of equipment terminals and terminations of
certain designated conductors, including general rules for an alphanumeric
system
GB 4208 Degrees of protection provided by enclosure (IP code)
GB/T 4728 Graphical symbols for diagrams
GB/T 5094.1 Industrial systems, installations and equipment and industrial
products - Structuring principles and reference designations - Part 1. Basic
rules
GB/T 7159 General rules for the formulation of letter symbols in
electrotechnology
GB/T 11022-1999 Common specifications for high-voltage switchgear and
control-gear standards
GB/T 12173 Mining electrical apparatus for non-hazardous area
GB/T 13384 General specifications for packing of mechanical and electrical
product
GB 14048.1-2006 Low-voltage switchgear and control-gear - Part 1. General
rules
GB 14048.2 Low-voltage switchgear and control-gear - Part 2. Circuit-
breakers
GB 14048.3 Low-voltage switchgear and control-gear - Part 3. S witches
disconnectors switch-disconnectors and fuse-combination units
GB 14048.4-2003 Low-voltage switchgear and control-gear -
Electromechanical contactors and motor-starters
GB/T 14808 High-voltage alternating current contactors and contactor-
4.6 The rated frequency of electrical apparatus is generally 50 Hz.
4.7 Electrical apparatus is generally 8 h working system. The others are
regulated by their respective product standards.
4.8 Electrical apparatus shall be equipped with the necessary spare parts,
accessories, special tools and accompanied files. It shall be provided with two
sets of important electronic plug-in, or one set of general electronic plug-in, to
facilitate the use, management, maintenance of the user. The accompanied
files shall include the product certificate, instructions for use, packing list.
5 Technical requirements
5.1 Conditions for normal use
Electrical apparatus shall work reliably under the following conditions.
a) The ambient air temperature is -5 °C ~ +40 °C1), the average temperature
within 24 h does not exceed 35 °C.
b) Altitude of the location of installation. The altitude of low-voltage electrical
apparatus does not exceed 2000 m 2 ). The altitude of high-voltage
electrical apparatus does not exceed 1000 m3).
c) Relative humidity of the surrounding air. The relative humidity of the air
does not exceed 50% at a maximum temperature of 40 °C. It allows a
higher relative humidity at a lower temperature, for example, 90% at 20 °C.
For the condensation that occasionally occurs due to temperature
changes, it shall take special measures.
d) The use in places where there is a risk of gas and coal dust explosion
shall follow the provisions of clause 4.3.
e) In a non-corrosive, non-insulation-destruc...