CNCA C18-03-2020 English PDF (CNCAC18-03-2020)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click CNCA C18-03-2020
Historical versions: CNCA C18-03-2020
Preview True-PDF (Reload/Scroll if blank)

CNCA C18-03-2020: Implementation Rules for Compulsory Product Certification -- Evacuation Products
CNCA-C18-03:2020
CNCA / CCC
Serial No.: CNCA-C18-03:2020
CNCA-C18-03-2020
Implementation Rules for Compulsory Product
Certification - Evacuation Products
避难逃生产品
Issued on: November 30, 2020 Effective on: November 30, 2020
Issued by: Certification and Accreditation Administration of the People’s Republic
of China (CNCA)
Table of Contents
0 Introduction ... 4 
1 Application scope ... 4 
2 Certification basis-standards ... 4 
3 Certification modes ... 4 
3.1 Basic certification mode ... 5 
3.2 Certification requirements based on risk prevention ... 5 
3.3 After-certification supervision... 5 
4 Division of certification units ... 5 
5 Certification entrusting ... 6 
5.1 Application and acceptance of certification entrusting ... 6 
5.2 Certification entrusting materials ... 6 
5.3 Implementation arrangement ... 6 
6 Certification implementation ... 7 
6.1 Type test ... 7 
6.2 Document review ... 8 
6.3 Factory inspection ... 9 
6.4 Adoption of relevant results ... 10 
6.5 Certification evaluation and decision ... 10 
6.6 Time limit of the certification ... 10 
7 After-certification supervision ... 10 
7.1 After-certification follow-up inspection ... 10 
7.2 Production or port on-site sampling test or inspection ... 11 
7.3 On-site sampling test or inspection ... 12 
7.4 Frequency and time of after-certification supervision ... 12 
7.5 Record of after-certification supervision ... 13 
7.6 Acceptance of the results of quality supervision spot checks and fire protection
inspections ... 13 
7.7 Evaluation on after-certification supervision results ... 13 
8 Certificate ... 13 
8.1 Maintenance of certificate ... 13 
8.2 Content of certificate ... 13 
8.3 Change of certificate ... 14 
8.4 Certificate’s cancellation, suspension and withdrawal ... 14 
8.5 Use of certificate ... 14 
9 Certification mark ... 15 
10 Product specification and certificate of conformity ... 15 
11 Charges ... 15 
12 Certification responsibility ... 15 
13 Certification implementation detailed-rules ... 16 
Attachment: Compulsory Certification Unit Division and Basis-Standards -
Evacuation Products ... 17 
0 Introduction
This Rules is established based on the safety risk and certification risk of
evacuation products in fire protection products. It stipulates the basic principles
and requirements for the implementation of compulsory product certification for
evacuation products used in public places and residences. Its purpose is to
ensure that the certified products continue to meet the requirements of laws,
regulations and standards.
This Rules can be used with other general implementation rules issued by
Certification and Accreditation Administration (CNCA), such as “China
Compulsory Certification Implementation Rules - Manufacturing Enterprise
Classification Management, Certification Mode Selection and Determination”,
“China Compulsory Certification Implementation Rules - Utilization of
Manufacturing Enterprise Testing Resource and Other Certification Results”,
“China Compulsory Certification Implementation Rules - Factory Inspection
General Requirements”.
The certification body shall make implementation detailed-rules for certification
according to the general implementation rules and this Rules and implement
them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of
sustaining the compliance with the certification and are compatible with the
requirements of the standards.
1 Application scope
This Rules applies to evacuation products used in public places and residences,
mainly including the following types: escape products, self-rescue respirators, fire
emergency lighting and evacuate indicating products, and fire safety signs.
2 Certification basis-standards
The basis-standards are shown in Attachment "Compulsory Certification Unit
Division and Basis-Standards - Evacuation Products".
The latest versions of standards for certification testing issued by the National
Standardization Administration shall be executed. When adding or reducing the
basis-standards or using other versions of the standards, it shall be implemented
in accordance with the corresponding announcement issued by the CNCA.
3 Certification modes
CLIENT shall submit a certification entrusting based on the unit division
requirements.
The same products produced by the same manufacturer and different
manufacturing enterprises, or the same products produced by different
manufacturers and the same manufacturing enterprise may be classified as the
same certification unit.
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in
an appropriate way. Certification body shall process the certification entrusting;
and feedback the acceptance or rejection according to the time limit in the
certification implementation detailed-rules. CLIENT shall be able to assume the
relevant product quality responsibilities. The relevant manufacturing enterprises
shall be able to produce normally; and comply with the requirements of national
laws and regulations and relevant industrial policies.
5.2 Certification entrusting materials
The certification body shall, according to the requirements of laws, regulations,
standards and certification, clarify the list of certification entrusting materials in
the certification implementation detailed-rules. It shall at least include the
certification entrusting application and contract, the registration certificate of
CLIENT, manufacturer and manufacturing enterprise, product conformity control
documents, product production process instructions, etc.
CLIENT shall provide the required materials according to the requirements of
certification implementation detailed-rules. Certification body is responsible for
auditing, managing, preserving and keeping confidential of the above-mentioned
materials; and shall inform the CLIENT of the auditing results.
In order to simplify the procedure, CLIENT may submit the type test report issued
by the laboratory designated by the CNCA at the same time.
5.3 Implementation arrangement
Certification body shall agree with the CLIENT on the relevant responsibilities
and arrangement of various aspects of certification implementation. And
according to the situation of manufacturing enterprise and classification
management AND the requirements of this Rules and certification
implementation detailed-rules, DETERMINE the specific program of certification
implementation and INFORM CLIENT.
6 Certification implementation
The certification body shall establish an information management system
suitable for the product certification activities carried out.
6.1 Type test
The certification body shall clarify the basic requirements of type test in the
certification implementation detailed-rules. It shall include the applicable
inspection items, sample sampling/sending requirements, quantity, inspection
time limit, key components and raw materials used in the product. It shall clarify
conditions and specific requirements for acceptable conformity assessment
results.
CLIENT shall select on its own the laboratory designated by CNCA (hereinafter
referred to as the laboratory) for type test.
The laboratory shall sign a type test contract with the CLIENT. The contract shall
include the t...