GB 15934-2008 English PDF (GB15934-2008)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 15934-2008
Historical versions: GB 15934-2008
Preview True-PDF (Reload/Scroll if blank)

GB 15934-2008: [GB/T 15934-2008] Electrical accessories -- Cord sets and interconnection cord sets
GB 15934-2008
[GB/T 15934-2008] Electrical accessories. Cord sets and mutually cord sets
ICS 29.120.10
K30
National Standards of People's Republic of China
GB 15934-2008/IEC 60799.1998
Replacing GB 15934-1996
Electrical Accessories Wire Assembly and Interconnect Wire Assembly
(IEC 60799.1998Ed.2.0, IDT)
Published on.2008-06-19
2009-06-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface I
IEC Foreword II
1 Range 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 2
5 Request 2
6 Electrical continuity and polarity 4
7 EMC requirements 4
Appendix A (Informative) Routine Tests for Safety and Protection of Wire Components and Interconnect Wire Components for Factory Wiring
Correct polarity) 5
GB 15934-2008/IEC 60799.1998
Foreword
The entire technical content of this standard is mandatory.
This standard is equivalent to using IEC 60799.1998 "Electrical Accessories Wire Assembly and Interconnect Wire Assembly" (Second Edition).
This standard is a revision of GB 15934-1996.
The main differences between this standard and GB 15934-1996 are as follows.
a) The standard name changed from "Wire Assembly" to "Electrical Accessories Wire Assembly and Interconnect Wire Assembly". Interconnection wires were added to the standard.
Component requirements.
b) Added "Interconnect Wire Components" to the scope of application of the standard (see Chapter 1).
c) This standard adds Chapter 2 "Normative References", which has one more chapter in structure than GB 15934-1996.
d) Added definitions of interconnected wire assemblies, type tests, and routine tests (see 3.2, 3.3, 3.4).
e) Increased requirements for type testing and routine testing (see Chapter 4).
f) Increased requirements for plug connectors in interconnected wire assemblies (see 5.1).
g) Increased connector and plug connector requirements for interconnected wire assemblies (see 5.2.1).
h) Add Chapter 7, "EMC Requirements."
i) Appendix A of this standard is "The factory routine test for the safety of wire assemblies and interconnecting wire assemblies for wiring (protection against electric shock and correct polarity
“Sexual”), Appendix A of GB 15934-1996 is “The Correspondence between the Standards Used in this Standard and the Standards Used in IEC 799”.
This standard replaces and abolishes GB 15934-1996 "Wire Assembly" from the date of implementation.
Appendix A of this standard is an informative annex.
This standard was proposed by the China Electrical Appliance Industry Association.
This standard is under the jurisdiction of the National Electrical Accessories Standardization Technical Committee.
This standard was drafted by. China Electric Apparatus Research Institute, Guangdong Entry-Exit Inspection and Quarantine Bureau, Ningbo Weier Electric Co., Ltd., Hangzhou Hongshi
Electric Co., Ltd.
The main drafters of this standard. Luo Huaiping, Li Min, Li Jianguo, Feng Yonglin, Lu Chongheng.
The previous versions of the standards replaced by this standard are.
--- GB 15934-1996.
GB 15934-2008/IEC 60799.1998
IEC Introduction
1) IEC (International Electrotechnical Commission) is a worldwide standard consisting of all national electrotechnical committees (IEC National Committees)
Qualification organization. The purpose of the IEC is to promote the international cooperation between countries in the field of electrical and electronics related to standardization issues.
In light of the above objectives and taking into account the needs of other activities, IEC has published international standards. The commissioning of the standard commissioned the technical committee
The staff will finish. Any IEC National Committee interested in this technical issue can participate in the development work. Associated with IEC
International, government and non-governmental organizations can also participate in this work. The IEC and the International Organization for Standardization (ISO ) were reached by both parties
The agreement is based on close cooperation.
2) IEC 's formal resolution or agreement on technical issues is a technical committee attended by all national committees interested in this issue.
Will be formulated, and as far as possible represent the international consensus on the issues involved.
3) These resolutions or agreements are published in the form of standards, technical reports or guidelines, and are used internationally in the form of recommendations, and in this sense
It was accepted by various national committees.
4) In order to promote international unity, IEC National Committee members use IEC standards as much as possible as a standard for various countries and regions.
quasi. Differences between IEC standards and corresponding national or regional standards should be clear in national or regional standards
Listed.
5) The IEC provides an approval-free program, but it does not represent responsibility for any equipment that claims to meet a certain standard.
6) Some of the content of this International Standard may involve the issue of patent rights, which should attract attention. The IEC organization is not responsible for identifying any
Or all such patent rights issues.
The international standard IEC 60799 is defined by the 23G subcommittee (apparatus coupler) in the IEC 23 Technical Committee (Electrical Accessories).
The second edition of this standard replaces the first edition published in 1984 and constitutes a technical revision.
This standard is based on the following documents.
FDIS vote report
23G/181/FDIS 23G/186/RVD
All the information on the adoption of this standard can be found in the voting report shown above.
Appendix A is only an informative appendix.
GB 15934-2008/IEC 60799.1998
Electrical Accessories Wire Assembly and Interconnect Wire Assembly
1 range
This standard specifies the requirements for wire assemblies and interconnect wire assemblies used in household and similar applications.
This standard does not apply to industrial wire assemblies (that is, with plugs and connectors that meet the requirements of GB/T 11918, GB/T 11919).
Industrial wire assemblies) do not apply to wire extension assemblies.
Note. According to the definition of this standard, the power cord with removable plugs and connectors is not a "wire assembly". But considering that they are similar to "wire assembly" and
The use is similar, so it is recommended that this kind of power cord with a removable plug and connector should use the requirements of this standard as much as possible.
2 Normative references
The clauses in the following documents have been adopted as references to this standard. All dated references, all subsequent
The amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement according to this standard
Can you use the latest version of these files? For undated references, the latest version is applicable to this standard.
GB 1002 single phase plugs and sockets for household and similar use types, basic parameters and dimensions
GB 1003 Household and similar three-phase plug and socket types, basic parameters and dimensions
GB 2099.1 Plugs and socket-outlets for household and similar purposes Part 1. General requirements (GB 2099.1-1996, eqv IEC 60884-1.
1994)
GB 5013 (all parts) Rubber insulated cable (IEC 60245, IDT) with rated voltage of 450/750V and below
GB 5023 (all parts) PVC insulate...