GB/T 9813.3-2017 English PDF (GBT9813.3-2017)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 9813.3-2017
Historical versions: GB/T 9813.3-2017
Preview True-PDF (Reload/Scroll if blank)

GB/T 9813.3-2017: General specification for computer -- Part 3: Server
GB/T 9813.3-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 35.160
L 62
General specification for computer - Part 3: Server
ISSUED ON: MAY 31, 2017
IMPLEMENTED ON: DECEMBER 01, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 7
4 Technical requirements ... 8
5 Test methods ... 16
6 Quality assessment procedure ... 27
7 Marking, packaging, transportation and storage ... 30
Annex A (informative) Inspection program compilation principles and technical
requirements ... 31
Annex B (normative) Fault classification and judgment ... 32
Annex C (informative) Calculation method of acceleration factor in reliability test .. 34
General specification for computer - Part 3: Server
1 Scope
This Part of GB/T 9813 specifies the technical requirements, test methods, quality
assessment procedures and marking, packaging, transportation and storage
requirements for servers containing 1 to 4 CPUs (hereinafter referred to as: products).
This Part is applicable to the design and manufacture of servers with 1 to 4 CPUs. Other
types of server product standards can be used for reference.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 191, Packaging and storage marks
GB/T 1988, Information technology. 7-bit Coded character set for information
interchange
GB/T 2421.1, Environmental testing for electric and electronic products -- General
and guidance
GB/T 2422, Environmental testing -- Guide to drafting of test methods -- Terms and
definitions
GB/T 2423.1, Environmental testing for electric and electronic products - Part 2:
Test methods - Tests A: Cold
GB/T 2423.2, Environmental testing for electric and electronic products - Part 2:
Test methods - Tests B: Dry heat
GB/T 2423.3, Environmental testing for electric and electronic products - Part 2:
Testing method - Test Cab: Damp heat, steady state
GB/T 2423.5, Environmental testing for electric and electronic products - Part 2:
Test methods - Test Ea and guidance: Shock
GB/T 2423.10, Environmental testing - Part 2: Test methods - Test Fc: Vibration
(sinusoidal)
The keyboard input shall comply with the requirements of GB/T 19246 and GB/T
18031.
b) Handwriting Input
The handwriting input method software equipped with the product shall comply with
the requirements of GB/T 18790.
c) Voice input
The voice input function of the product shall comply with the requirements of GB/T
21023.
4.1.3.4 Chinese vocabulary
The Chinese vocabulary equipped with the product shall give priority to the word
library specified in GB/T 15732. The vocabulary expanded on the basis of GB/T 15732
shall comply with the language and writing standards or habits of my country, and shall
have the basis of the source of the vocabulary.
4.2 Appearance and structure
4.2.1 The product surface shall not have obvious dents, scratches, cracks, deformations
and pollution, etc. The surface coating shall be uniform and shall not bubble, crack, fall
off or wear, and the metal parts shall be free of rust and other mechanical damage.
4.2.2 The words, symbols and signs describing the functions on the surface of the
product shall be clear, correct and firm, and shall comply with relevant national
standards.
4.2.3 The product components shall be fastened without looseness. Pluggable
components shall be reliably connected. Switches, buttons and other control
components shall be flexible and reliable. The layout shall be easy to use.
4.2.4 The operating state indication function shall be provided in a prominent position
on the product. The specific meaning of the indication function shall be specified in the
product standard or explained in the product accompanying documents.
4.2.5 The product shall have a good grounding system. The logic ground and protection
ground shall be separated from the AC ground.
4.2.6 Packaging and cushioning materials shall give priority to materials that meet
environmental protection requirements.
4.2.7 The structural design shall follow the requirements of standardization and
serialization. The internal structure of the chassis shall meet the installation
requirements of common components. The appearance and structural dimensions of the
rack chassis shall meet the installation requirements of common cabinets. The external
dimensions of the circuit board interface inserted into the bus socket shall comply with
the provisions of the relevant bus standards. All input and output interfaces shall comply
with relevant national or industry standards.
4.3 Function and performance
4.3.1 basic functions
4.3.1.1 Reliable operation support
The memory and hard disk of the product shall comply with the relevant provisions of
GB/T 21028. The memory shall have data error correction (ECC) function. The hard
disk shall provide data security protection function.
4.3.1.2 System performance indicators
The performance technical indicators and parameters of the main functional units of the
product (such as central processing unit, memory, input and output controller,
peripheral device controller, network interface, etc.) shall be specified in the product
standards or described in the product accompanying documents.
4.3.2 Optional functions
4.3.2.1 Description
The following functions are optional. The functions of the product shall be specified in
the product standard or described in the product accompanying documents.
4.3.2.2 Network interface function
The product's network interface shall support load balancing and redundancy functions.
4.3.2.3 Operational reliability support function
The power supply, fan and other components of the product shall comply with the
relevant provisions of GB/T21028. When a component fails, the product shall be able
to send an alarm message to the system administrator in one or more forms such as
indicator light, sound, email, short message, etc.
4.3.2.4 Remote operability function
The product shall be able to be powered on, powered off, restarted, etc. remotely
regardless of the operating system. The remote operation of the product shall have the
necessary user identity authorization and verification as well as operation event
recording functions.
4.3.2.5 State monitoring
The product's power supply, hard disk, fan and other components shall comply with the
5 Test methods
5.1 Test environment conditions
Unless otherwise specified, the tests are carried out under the following normal
atmospheric conditions:
- Temperature: 15℃~35℃;
- Relative humidity: 25%~75%;
- Atmospheric pressure: 86 kPa~106 kPa.
5.2 Appearance and structure inspection
The appearance and structure inspection shall be carried out by visual inspection and
relevant inspection tools and shall comply with the requirements of 4.2.
5.3 Functional and performance inspection
5.3.1 Inspection procedure
If the product function is checked by running the inspection program (the enterprise
provides the test software), the inspection program shall be run once....