QC/T 929-2022 English PDF (QCT929-2022)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QC/T 929-2022
Historical versions: QC/T 929-2022
Preview True-PDF (Reload/Scroll if blank)

QC/T 929-2022: Plastic cable and tubing clips with side-fix hole
QC/T 929-2022
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040
CCS T 33
Replacing QC/T 929-2013
Plastic cable and tubing clips with side-fix hole
ISSUED ON: APRIL 08, 2022
IMPLEMENTED ON: OCTOBER 01, 2022
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 6
1 Scope ... 7
2 Normative references ... 7
3 Terms and definitions ... 7
4 Type and size ... 8
5 Technical conditions ... 9
6 Product numbering ... 10
Appendix A (Normative) Application of plastic cable and tubing clips with side-fix
holes ... 11
Foreword
This document was drafted, in accordance with GB/T 1.1-2020 "Directives for
standardization - Part 1: Rules for the structure and drafting of standardizing
documents".
This document replaces QC/T 929-2013 "Plastic cable and tubing clips with side-fix
hole". Compared with QC/T 929-2013, the main changes are as follows:
- REVISE the nominal values of D and d of the plastic cable and tubing clips with
side-fix hole (single tube) (see Table 1);
- REVISE the nominal values of D, D1 and d of the plastic cable and tubing clips
with side-fix hole (double tube) (see Table 2);
- ADD the aging requirements (see Table 3);
- ADD the requirements for prohibited substances (see Table 3);
- ADD the requirements for the insertion force of pin and withdrawal force of tubing
clip (see Table 3);
- ADD the requirements for combustion characteristics (see Table 3);
- ADD the requirements for acceptance quality limit (AQL) (see Table 3).
This document was proposed by AND shall be under the jurisdiction of the National
Automotive Standardization Technical Committee (SAC/TC 114).
Drafting organizations of this document: Guangzhou Automobile Group Co., Ltd.
Automotive Engineering Research Institute.
The main drafters of this document: Zhao Zhe, Wu Kunpei, Wang Pan, Wang Wei.
This standard replaces the standard previously issued as follows:
- It was first published as QC/T 929-2013 in 2013;
- This is the first revision.
Plastic cable and tubing clips with side-fix hole
1 Scope
This document specifies the type, size, technical conditions of plastic cable and tubing
clips with side-fix hole.
This document is applicable to plastic cable and tubing clips with side-fix hole for
automobiles, including two types of single tube and double tube and two types of
installation hole diameters (D0 = 6.5 or D0 = 8.0).
2 Normative references
The contents of the following documents constitute the essential provisions of this
document through normative references in the text. Among them, for dated references,
only the version corresponding to the date is applicable to this document; for undated
references, the latest version (including all amendments) is applicable to this document.
GB/T 90.1-2002 Fasteners - Acceptance inspection
GB/T 90.2-2002 Fasteners - Marking and packaging
GB 8410 Flammability of automotive interior materials
QC/T 15 General test method for automobile plastic products
QC/T 268 Extreme deviation for undeclared tolerance size of processing parts for
automobile cold stamping
QC/T 326 Coding rules for automotive standardized parts
QC/T 29017 Automotive molded plastic parts without individual tolerance limit the
size of the deviation
GB/T 30512 Requirements for prohibited substances on automobiles
3 Terms and definitions
This document does not have terms and definitions, that need to be defined.