CNCA C18-02-2020 English PDF (CNCAC18-02-2020)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click CNCA C18-02-2020
Historical versions: CNCA C18-02-2020
Preview True-PDF (Reload/Scroll if blank)

CNCA C18-02-2020: Implementation Rules for Compulsory Product Certification -- Fire Extinguisher Products
CNCA-C18-02:2020
CNCA / CCC
Serial No.: CNCA-C18-02:2020
CNCA-C18-02-2020
Implementation Rules for Compulsory Product
Certification - Fire Extinguisher Products
灭火器产品
Issued on: November 30, 2020 Effective on: November 30, 2020
Issued by: Certification and Accreditation Administration of the People’s Republic
of China (CNCA)
Table of Contents
0 Introduction ... 4 
1 Application scope ... 4 
2 Certification basis-standards ... 4 
3 Certification modes ... 4 
3.1 Basic certification mode ... 5 
3.2 Certification requirements based on risk prevention ... 5 
3.3 After-certification supervision... 5 
4 Division of certification units ... 5 
5 Certification entrusting ... 6 
5.1 Application and acceptance of certification entrusting ... 6 
5.2 Certification entrusting materials ... 6 
5.3 Implementation arrangement ... 6 
6 Certification implementation ... 7 
6.1 Type test ... 7 
6.2 Document review ... 8 
6.3 Factory inspection ... 9 
6.4 Adoption of relevant results ... 10 
6.5 Certification evaluation and decision ... 10 
6.6 Time limit of the certification ... 10 
7 After-certification supervision ... 10 
7.1 After-certification follow-up inspection ... 10 
7.2 Production or port on-site sampling test or inspection ... 11 
7.3 On-site sampling test or inspection ... 12 
7.4 Frequency and time of after-certification supervision ... 12 
7.5 Record of after-certification supervision ... 13 
7.6 Acceptance of the results of quality supervision spot checks and fire protection
inspections ... 13 
7.7 Evaluation on after-certification supervision results ... 13 
8 Certificate ... 13 
8.1 Maintenance of certificate ... 13 
8.2 Content of certificate ... 13 
8.3 Change of certificate ... 14 
8.4 Certificate’s cancellation, suspension and withdrawal ... 14 
8.5 Use of certificate ... 14 
9 Certification mark ... 15 
10 Product specification and certificate of conformity ... 15 
11 Charges ... 15 
12 Certification responsibility ... 15 
13 Certification implementation detailed-rules ... 16 
Attachment: Compulsory Certification Unit Division and Basis-Standards - Fire
Extinguisher Products ... 17 
0 Introduction
This Rules is established based on the safety risk and certification risk of fire
extinguisher products in fire protection products. It stipulates the basic principles
and requirements for the implementation of compulsory product certification for
fire extinguisher products used in public places and residences. Its purpose is to
ensure that the certified products continue to meet the requirements of laws,
regulations and standards.
This Rules can be used with other general implementation rules issued by
Certification and Accreditation Administration (CNCA), such as “China
Compulsory Certification Implementation Rules - Manufacturing Enterprise
Classification Management, Certification Mode Selection and Determination”,
“China Compulsory Certification Implementation Rules - Utilization of
Manufacturing Enterprise Testing Resource and Other Certification Results”,
“China Compulsory Certification Implementation Rules - Factory Inspection
General Requirements”.
The certification body shall make implementation detailed-rules for certification
according to the general implementation rules and this Rules and implement
them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of
sustaining the compliance with the certification and are compatible with the
requirements of the standards.
1 Application scope
This Rules applies to fire extinguisher products used in public places and
residences, mainly including the following types: portable fire extinguishers,
wheeled fire extinguishers and simplified fire extinguishers.
2 Certification basis-standards
The basis-standards are shown in Attachment "Compulsory Certification Unit
Division and Basis-Standards - Fire Extinguisher Products".
The latest versions of standards for certification testing issued by the National
Standardization Administration shall be executed. When adding or reducing the
basis-standards or using other versions of the standards, it shall be implemented
in accordance with the corresponding announcement issued by the CNCA.
3 Certification modes
6 Certification implementation
The certification body shall establish an information management system
suitable for the product certification activities carried out.
6.1 Type test
The certification body shall clarify the basic requirements of type test in the
certification implementation detailed-rules. It shall include the applicable
inspection items, sample sampling/sending requirements, quantity, inspection
time limit, key components and raw materials used in the product. It shall clarify
conditions and specific requirements for acceptable conformity assessment
results.
CLIENT shall select on its own the laboratory designated by CNCA (hereinafter
referred to as the laboratory) for type test.
The laboratory shall sign a type test contract with the CLIENT. The contract shall
include the type test plan based on the principle of unit division, sample
requirements and quantity, test standard items, laboratory information, charging
standards, and charging methods, etc.
6.1.1 Authenticity requirements of type test samples
CLIENT shall guarantee that all the samples provided are consistent with actual
products. The laboratory shall review the authenticity of the samples provided by
CLIENT. When the authenticity of the sample is in doubt, the laboratory shall deal
with it in accordance with relevant regulations; and explain the situation to the
certification body in time.
6.1.2 Implementation of type test
Type test shall be conducted in the laboratory. Laboratory shall conduct the type
test to the samples, integrally record the whole test and archive for retaining, so
that the test process and results are traceable. The laboratory shall stipulate and
publicize the test time limit for each compulsory certification product designated
to be tested.
If the manufacturing enterprise has the test conditions required by "China
Compulsory Certification Implementation Rules - Utilization of Manufacturing
Enterprise Testing Resource and Other Certification Results" and by the
certification standards, in the implementation detailed-rules, the certification body
shall specify the management procedures and specific requirements for the use
of testing resources of the manufacturing enterprise.
6.1.3 Type test report
allowed. After the certification body adopts appropriate methods to confirm that
the rectification is effective, the result is concluded as “PASS”.
When there are serious disqualified items in the factory inspection, the result is
concluded “FAIL”.
6.4 Adoption of relevant results
The certification body shall arrange for adopting other conformity assessment
results. The relevant requirements shall be stipulated in the certification
implementation detailed-rules.
6.5 Certification evaluation and decision
The certification body conducts a comprehensive evaluation of the type test,
factory inspection results and related materials/information. If the evaluation is
passed, the certificate will be issued according to the unit. If the evaluation is not
passed, the certification will be terminated.
6.6 Time limit of the certification
The certification body shall clearly stipulate ...