CCAP-GZ-5101-2020 English PDF (CCAP-GZ-5101-2020)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click CCAP-GZ-5101-2020
Historical versions: CCAP-GZ-5101-2020
Preview True-PDF (Reload/Scroll if blank)

CCAP-GZ-5101-2020: Detailed Implementation Rules for China Compulsory Certification - Interior trim parts of Motor vehicle
File No.: CCAP-GZ-5101:2020
Document Name: Interior trim parts of Motor vehicle
Serial No.: CCAP-GZ-5101:2020
Implementation Rules for CCAP Mark
Certification of Motor Vehicle Products
Interior trim parts of Motor vehicle
ISSUED ON: JULY 01, 2020
IMPLEMENTED ON: JULY 01, 2020
China Certification Centre for Automotive Products
Document Name: Interior trim parts of Motor vehicle
Table of Contents
0 Introduction ... 5 
0.1 Terms and Definitions ... 5 
0.2 Manufacturing enterprises classification management requirements ... 5 
0.3 Requirements on utilizing the manufacturing enterprise test resources ... 7 
1 Application scope ... 8 
2 Certification basis and standards ... 8 
3 Certification mode selection and relevant requirements ... 9 
3.1 Basic certification modes ... 9 
3.2 Applicability of certification mode ... 9 
4 Classification of certification unit ... 9 
5 Certification entrusting ... 10 
5.1 Certification process ... 10 
5.2 Certification entrusting materials ... 10 
5.3 Certification plan and certification contract ... 12 
6 Certification implementations ... 12 
6.1 Type test ... 12 
6.2 Initial factory inspection ... 17 
6.3 Certification evaluation and decision ... 20 
6.4 Time-limit of certification ... 20 
6.5 Maintenance parts of vehicle-models out of production ... 20 
7 Post-certification supervision... 20 
7.1 Post-certification follow-up inspection ... 21 
7.2 Production on-site sampling test or inspection ... 22 
7.3 Market sampling test or inspection ... 22 
7.4 Frequency and time of post-certification supervision ... 23 
7.5 Record of post-certification supervision ... 23 
7.6 Evaluation of post-certification supervision result ... 23 
8 Certificate ... 24 
8.1 Maintenance of certificate... 24 
8.2 Content of certificate ... 24 
8.3 Change of certificate ... 24 
8.4 Cancellation, suspension and withdrawal of certificate ... 25 
8.5 Use of certificate ... 25 
9 Certification marks ... 25 
9.1 Mark style permitted to use ... 25 
9.2 Use requirements ... 26 
10 Charges ... 26 
11 Certification responsibilities ... 26 
12 Process and time-limit requirements related to technical disputes, complaints and
appeal ... 27 
Attachment 1 -- Description of interior trim parts of motor vehicles ... 28 
Attachment 2 – Production conformity requirements ... 30 
Appendix 1 -- Factory quality assurance ability requirements ... 33 
Attachment 3 -- Compilation requirements of production conformity control plan and
Document Name: Interior trim parts of Motor vehicle
implementation report ... 39 
Appendix 1 -- Recommended format of production conformity control plan ... 43 
Attachment 4 -- Implementation of certification of after-sales repair spare parts for
discontinued models ... 46 
Attachment 5 – Type test items ... 48 
Document Name: Interior trim parts of Motor vehicle
0 Introduction
According to the new type test requirements for interior trim parts of motor
vehicle in "Implementation rules for compulsory product certification - Motor
vehicles" (CNCA-C11-01: 2020), China Certification Centre for Automotive
Products has adjusted the scope of application of this Rules, so as to ensure
the normal and orderly provision of services by manufacturers of automotive
interior trim parts and the supply of complete vehicles.
0.1 Terms and Definitions
0.1.1 Interior materials
The terms and definitions in GB 8410-2006, GB 38262-2019 and GB 24407-
2012 apply to this Rules.
0.1.2 Testing at manufacturer’s premises (abbreviated as TMP mode)
It means that the engineers of designated laboratory use the testing equipment
in the factory laboratory to conduct testing. The factory shall dispatch test
personnel to provide assistance. The designated laboratory shall examine,
approve and issue the test report.
0.1.3 Witnessed manufacturer’s testing (abbreviated as WMT mode)
It means that the engineer of designated laboratory witnesses the factory
laboratory’s test conditions and all tests completed by using the laboratory’s
equipment or according to the test plan submitted; or witnesses part of the test
conditions and the test items. Test personnel of the factory laboratory shall
provide the original records and draft up the test report together with the
engineer of designated laboratory according to relevant provisions. The
designated laboratory shall audit, approve and issue the test report.
0.2 Manufacturing enterprises classification management requirements
CCAP conducts risk assessment and classification to the certification
enterprises, according to information of the certification enterprises collected
from various channels and adopts differentiation management modes and risk
control measures to different kinds of enterprises in order to ensure
effectiveness of CCC certificate.
CCAP assesses the certification enterprises as 4 categories - A, B, C and D for
classification management.
0.2.1 Information sources of classification management
(1) Findings from factory inspection and the inspection conclusion (including
Document Name: Interior trim parts of Motor vehicle
0.3.2 Implementation
If the manufacturing enterprise has the inspection equipment and capabilities
required by the certification standards, the certification client, the manufacturer
or the manufacturing enterprise can apply to CCAP for utilizing the
manufacturing enterprise’s test resources (hereinafter referred to as the factory
lab) to the certification body; and then conduct self-check. Submit the self-
inspection results and related materials to CCAP for review along with the
application. If the factory lab is up to the standard of CCAP (organizing
designated lab to participate), then the test resources of the manufacturing
enterprise can be used to conduct production on-site TMP test (or WMT test).
In order to lighten the burden of the enterprise, in principle, CCAP shall not
organize to audit the factory lab independently. Application for audit of the
factory lab and on-site testing application can be submitted together or
separately by the certification client. CCAP shall organize technical experts of
the designated labs to conduct on-site verification and keep relevant verification
evaluation record. After the capacities of the factory lab passes the inspection
team’s audit, the factory lab can be used to conduct testing.
0.3.3 Maintenance of qualification
In principle, besides annual supervision inspection, CCAP shall conduct regular
supervision inspection to the approved factory lab. When necessary, CCAP
shall organize the factory lab to conduct comparative test, so as to ensure the
effectiveness of the test result.
If the manufacturing enterprise needs, one-time inspection can be made for the
on-site test item proposed by the certification client. The result is only valid for
that specific on-site inspection item. The factory lab may be exempted from the
supervision to maintain the qualification. When there is another test involving in
the same item, a new application shall be applied.
1 Application scope
This Rules is applicable to interior trim parts made of organic materials or
organic composite materials used on motor vehicles.
2 Certification basis and standards
GB 8410-2006, Flammability of automotive interior materials
GB 38262-2019, Flammability of interior materials for buses
GB 24407-2012, The safety technique specifications of special school...