CCAP-GZ-5561-2019 English PDF (CCAP-GZ-5561-2019)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click CCAP-GZ-5561-2019
Historical versions: CCAP-GZ-5561-2019
Preview True-PDF (Reload/Scroll if blank)

CCAP-GZ-5561-2019: CCAP mark certification implementation rules -- Non-metallic materials and parts for electric bicycles
CCAP-GZ-5561-2019
Serial No.: CCAP-GZ-5561-2019
Implementation Rules for CCAP Mark Certification
Non-metallic materials and parts of electric power assist bicycles
ISSUED ON: MARCH 15, 2019
IMPLEMENTED ON: MARCH 15, 2019
China Certification Centre for Automotive Products
Table of Contents
1 Application scope ... 4
2 Certification basis and standards ... 4
3 Certification mode ... 4
4 Classification of certification unit ... 4
5 Certification entrusting ... 5
5.1 Certification process ... 5
5.2 Certification entrusting materials ... 5
5.3 Certification plan and certification contract ... 5
6 Certification implementations ... 6
6.1 Type test ... 6
6.2 Certification evaluation and decision ... 8
6.3 Time-limit of certification ... 8
7 Post-certification supervision ... 8
7.1 Post-certification follow-up inspection ... 8
7.2 Production on-site sampling test or inspection ... 11
7.3 Record of post-certification supervision ... 12
7.4 Assessment of post-certification supervision result ... 12
8 Certificate ... 12
8.1 Maintenance of certificate ... 12
8.2 Content of certificate ... 12
8.3 Change of certificate ... 12
8.4 Cancellation, suspension and withdrawal of certificate ... 13
8.5 Use of certificate ... 13
9 Certification marks ... 13
9.1 Mark style permitted to use ... 14
9.2 Use requirements ... 14
10 Charges ... 14
11 Certification responsibilities ... 14
12 Process and time-limit requirements related to technical disputes, complaints and appeal ... 15
Attachment 1 – List of documents and materials to be submitted by the applicant ... 16
Attachment 2 – Factory quality assurance ability requirements ... 22
1 Application scope
This Rules applies to the CCAP mark certification of non-metallic materials and parts
of electric power assist bicycles.
2 Certification basis and standards
GB 17761-2018, Safety technical specification for electric bicycle
GB/T 5169.11-2017, Fire hazard testing for electric and electronic products - Part 11:
Glowing/hot-wire based test methods - Glow-wire flammability test method for end-
products (GWEPT)
GB/T 5169.16-2017, Fire hazard testing for electric and electronic products - Part 16:
Test flames - 50 W horizontal and vertical flame test methods
GB 8410-2006, Flammability of automotive interior materials
3 Certification mode
Type test + post-certification supervision
4 Classification of certification unit
In principle, the materials and parts produced by the same-producer (manufacturer) and
same manufacturing enterprise (location), and having no significant difference in the
following aspects could be classified as one certification unit:
1) The material and processing technology of the material;
2) The structure of non-metallic materials and parts (number of layers, number of
blocks, connection methods, etc.);
3) The test temperature requirements for fire resistance of the glow wire (two types:
550 °C and 750 °C as specified in GB/T 5169.11);
4) The requirements for flame retardance (V-0, V-1 specified in GB/T 5169.11 and
Chapter 3 of GB 8410-2006).
In principle, the certification client shall propose certification entrustment based on the
unit classification principle. The same unit can contain multiple “models (or
specifications)” of products.
For the same product that is of same manufacturer but of different manufacturing
enterprises, or for the same-model product that is of different manufacturers and of the
same manufacturing enterprise, it may consider to only conduct the type test on the
samples of one unit. The products of other manufacturing enterprises / manufacturers
shall provide documents for conformity inspection.
5 Certification entrusting
5.1 Certification process
(1) Certification entrusting, materials review and acceptance;
(2) Dividing certification product unit, formulating the certification plan;
(3) Signing the certification contract and charging;
(4) Product type test;
(5) Certification evaluation and decision;
(6) Issuing the certificate;
(7) Post-certification supervision.
5.2 Certification entrusting materials
See Attachment 1 List of documents and materials to be submitted by the applicant.
5.3 Certification plan and certification contract
CCAP shall review the application materials. If the application materials need to be
supplemented or improved, it shall communicate with the client and require
supplementing and submitting relevant materials. After the review completes, it shall
issue a notice of acceptance or not-acceptance to the client.
After accepting the application, CCAP shall formulate a certification plan according to
the audit result, which includes:
(1) The certification mode adopted and unit division;
(2) Type test plan (including the selection and confirmation of the designated
laboratory);
(3) Estimated certification fees;
(4) Other matters and requirements that need to be explained.
CCAP shall give the above certification plan to the client. After reaching a consensus,
it shall sign a formal certification contract with the client as the basis for certification
implementation.
6 Certification implementations
6.1 Type test
6.1.1 Type test plan
CCAP shall formulate the product inspection plan after reviewing the materials. The
inspection plan includes requirements and quantity of all samples, the inspection
standard, inspection items, and information of the designated labs that can be selected
by the certification client.
6.1.2 Sample requirements of type test
The samples for type test shall be products produced by the manufacturing enterprise
entrusted with certification according to normal processing methods. The certification
client shall ensure that the samples provided by it are consistent with the actual products
produced, and shall not obtain samples for testing by borrowing, renting, purchasing,
etc.
In principle, in the type test, the certification client shall send the samples to the
designated lab for testing. When necessary, CCAP can also obtain samples for testing,
by on-site sampling / sealing, in accordance with the requirements of the type test plan.
If there is only one model in one certification unit, samples of that model shall be sent
for testing. If there are multiple models in one unit, CCAP can choose a representative
model; a differential test shall be made for other models when necessary.
CCAP and/or the lab shall review the authenticity of the samples provided by the
certification client. Where the laboratory has doubts about the authenticity of the sample,
it shall explain the situation to CCAP and handle it accordingly.
In principle, it shall be ensured that samples are sent to the laboratory for type test
within 10 days. If samples are not sent within the specified time due to special
circumstances, sufficient reasons for delaying sample delivery shall be provided to
CCAP.
6.1.2.1 Quantity of type test samples
The quantity of samples to be sent shall comply with the provisions in Table 1 of this
Rules.
The number of test samples that need to be supplemented shall be subject to the test
plan finally confirmed by CCAP.
The certification client shall ensure that the submitted samples are completely
consistent with the actual products produced, including materials, structures,
parameters, etc.
information. After the certification completes, CCAP shall send the type test report,
together with the certificate ...