TB 10029-2009 English PDF (TB10029-2009)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click TB 10029-2009
Historical versions: TB 10029-2009
Preview True-PDF (Reload/Scroll if blank)

TB 10029-2009: Code for design of railway passenger car rolling stock facilities
TB 10029-2009
TB
INDUSTRY STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
UDC
P TB 10029-2009
J 165-2009
Code for design of railway passenger car rolling stock
facilities
ISSUED ON: JULY 01, 2009
IMPLEMENTED ON: JULY 06, 2009
Issued by: Ministry of Railway of PRC
INDUSTRY STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
Code for design of railway passenger car rolling stock
facilities
J 165-2009
Main drafting organization: China Railway Second Engineering Group Co., Ltd.
Participating drafting organization: The Third Railway Survey and Design
Institute Group Co., Ltd.
Effective date: July 6, 2009
2009 • Beijing
Table of Contents
Foreword ... 6 
1 General ... 8 
2 Terms ... 9 
3 Passenger car rolling stock depot ... 11 
3.1 General rules ... 11 
3.2 Selection of passenger car depot site ... 12 
3.3 Scale of the passenger car rolling stock depot ... 12 
3.4 General layout of the passenger car depot ... 13 
3.5 Repair garage ... 16 
3.6 Paint warehouse... 18 
3.7 Bogie room ... 18 
3.8 Axle room ... 20 
3.9 Wheel shed ... 21 
3.10 Rolling bearing room ... 21 
3.11 Accessory repairing center ... 22 
3.12 Servicing workshop for passenger car's air-conditioning units ... 23 
3.13 Hook buffer room ... 23 
3.14 Electrical and electronic servicing workshop ... 24 
3.15 Brake room ... 25 
3.16 Other servicing workshops ... 25 
3.17 Laboratory ... 26 
3.18 Metering room ... 26 
3.19 Equipment servicing room ... 27 
3.20 Boiler room ... 28 
3.21 Compressed air station ... 28 
3.23 Material warehouse ... 29 
3.24 Transportation equipment... 30 
4 Passenger car technical servicing depot ... 31 
4.1 General rules ... 31 
4.2 Location and general layout of passenger car technical servicing depot ... 32 
4.3 Line layout and main facilities on the line group ... 33 
4.4 Repairing workshop... 38 
4.5 Power facilities ... 43 
4.6 Material warehouse and garage ... 43 
4.7 Oil depot ... 44 
5 Passenger car inspection department ... 45 
6 Information system ... 46 
6.1 General ... 46 
6.2 System composition and function ... 46 
6.3 Network design... 47 
6.4 System software and hardware configuration ... 48 
6.5 Others ... 49 
Explanation of wording in this code ... 50 
Code for design of railway passenger car rolling stock
facilities
1 General
1.0.1 In order to improve the servicing quality of railway passenger cars, ensure
the safety of passenger cars, unify the technical standards for the design of
passenger car rolling stock facilities, make the design of passenger car rolling
stock facilities to be technologically advanced, economical and reasonable,
safe and applicable, this code is hereby formulated.
1.0.2 This code is applicable to the engineering design of new or rebuilt railway
passenger car facilities with standard gauges in the national railway network.
1.0.3 The design of railway passenger car facilities shall include facilities such
as passenger car rolling stock depot (referred to as passenger car depot),
passenger car technical servicing depot, railway passenger car inspection
department (referred to as passenger car inspection department).
1.0.4 The design year of railway passenger car rolling stock facilities shall be
divided into short-term and long-term. The short-term is the 10th year after
delivery and operation; the long-term is the 20th year after delivery and
operation.
The design of railway passenger car rolling stock facilities shall be a
combination of short-term and long-term, focusing on the short-term, reserve
development conditions based on the long-term scale.
1.0.5 The design of passenger car rolling stock facilities shall be based on
factors such as the car type, number of cars attached, the workload of overhaul
and operation and servicing, transportation organization, related passenger car
rolling stock facilities, as well as the passenger car repair system, car
technology development, road network planning.
When determining the design plan of the passenger car rolling stock facilities,
a technical and economic comparison shall be made to select the best plan.
1.0.6 During the renovation and expansion of railway passenger car rolling
stock facilities, existing equipment may be used to minimize demolition and
abandonment work, reduce the impact and interference of construction on
production.
rolling stock facilities (including passenger car rolling stock depots, passenger
car technical servicing depots, passenger car inspection department, etc.).
2.0.2 Passenger car rolling stock depot
The production premises that undertake the servicing of railway passenger car
depots and the management tasks of the operation and servicing of passenger
car rolling stock facilities within its jurisdiction.
2.0.3 Passenger car technical servicing depot
The passenger car operation and servicing place which is responsible for the
technical inspection of passenger cars of the departure and the final arrival, as
well as the regular servicing of the passenger cars and the electric equipment.
2.0.4 Passenger car inspection department
The operation and servicing space for passenger cars that undertakes technical
inspections of passenger cars, brake tests, repairs without taking off the trains.
2.0.5 Passenger car stabling sidings
In the passenger car technical service depot, the line which is used for parking
under the passenger car.
2.0.6 Coefficient of non-serviceable rolling stock
The ratio of the sum of the number of spare cars and the number of overhauled
cars to the number of cars in use.
2.0.7 Utility factor of car repairing positions
The ratio of the number of cars in the daily servicing of car equipment to the
number of servicing depots in the repair garage (shed).
2.0.8 Coefficient of passenger car servicing tracks
The ratio of the number of passenger car servicing tracks configured to the
number of servicing passenger train sets that needs to enter the servicing
position.
2.0.9 Length of each car repairing position
The length of each car repair position occupying the repairing track.
2.0.10 Calculation length of car
The length of the car as specified for calculating the length of the track occupied
by the parked car.
loading and unloading lines and roads; there shall be sufficient space near the
warehouse. The storage rooms for flammable, explosive, toxic, hazardous and
other dangerous goods shall be set up separately, which shall comply with
relevant requirements for safety and environmental protection.
3.4.3 The workshop that generates noise and shock vibration shall be far away
from the laboratory, metering room, bearing room, brake room, etc. Workshops
that produce high temperature, dust, and toxic and harmful gases shall be
arranged on the upwind side of the annual minimum frequency wind direction,
whilst the metering room shall be arranged on the downwind side of the annual
minimum frequency wind direction.
3.4.4 Power facilities such as compressed air stations and substations shall be
close to the load center.
The compressed air station shall be arranged on the leeward side of the annual
minimum frequency wind direction of the workshop that emits dust and harmful
gases; meanwhile it shall avoid the impact of noise and vibration on the
surrounding environment.
3.4.5 The storage site for scrap iron and steel in the depot shall be located in a
...