YD/T 1484.6-2013 English PDF (YDT1484.6-2013)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click YD/T 1484.6-2013
Historical versions: YD/T 1484.6-2013
Preview True-PDF (Reload/Scroll if blank)

YD/T 1484.6-2013: Measurement method for radiated RF power and receiver performance of wireless device. Part 6: LTE wireless device
YD/T 1484.6-2013
YD
COMMUNICATION INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 33.100
M 04
Measurement Method for Radiated RF Power and
Receiver Performance of Wireless Device -
Part 6. LTE Wireless Device
ISSUED ON. JULY 22, 2013
IMPLEMENTED ON. JULY 22, 2013
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms, Definitions and Abbreviations ... 5
4 Test Conditions ... 5
5 Radiated RF Power Measurement ... 5
5.1 FDD LTE radiated RF power measurement ... 5
5.2 TD-LTE radiated RF power measurement ... 8
6 Receiver Performance Measurement ... 12
6.1 FDD LTE receiver performance measurement ... 12
6.2 TD-LTE receiver performance measurement ... 14
6.3 Test procedure ... 14
Foreword
YD/T 1484, Measurement Method for Radiated RF Power and Receiver Performance
of Wireless Device, includes the following parts.
-- Part 1. General Requirements;
-- Part 2. GSM Wireless Device;
-- Part 3. 800MHz/2GHz CDMA2000 Wireless Device;
-- Part 4. 2GHz WCDMA Wireless Device;
-- Part 5. 2GHz TD-SCDMA Wireless Device;
-- Part 6. LTE Wireless Device.
This Part is part 6 of YD/T 1484.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part was drafted mainly by reference to 3GPP TR 25.914, TS 25.144, TS 34.114,
TR37.902 etc.
This Part was proposed by and shall be under the jurisdiction of China Communication
Standard Association.
The drafting organizations of this Part. China Academy of Telecommunication
Research of MIIT, China Telecommunication Corporation, China Mobile
Communication Corporation, ZTE Communication Co., Ltd., Huawei Technologies Co.,
Ltd., Tianjin Samsung Communication Technologies Co., Ltd., Motorola (Beijing)
Mobile Technologies Co., Ltd., China Potevio Information Industry Co., Ltd.
The main drafters of this Part. An Xudong, Guo Lin, Xiao Li, Liu Qifei, Ma Shuai, Xing
Jinqiang, Dai Guohua, Zhao Zibin, Xie Yuming, Zhang Xinghai, Yu Zhong, Chen Jinyue,
Sun Chengjun, Zhou Xutao, Lv Bo, Wang Na, Sun Can, Zhang Xiao, Liu Zheng.
Measurement Method for Radiated RF Power and
Receiver Performance of Wireless Device -
Part 6. LTE Wireless Device
1 Scope
This Part specifies the measurement method for radiated RF power and receiver
performance of LTE wireless device, including the frequency range and limiting values
of two systems, namely FDD LTE and TD-LTE.
This Standard applies to portable and vehicular wireless device, wireless device used
at fixed positions and data device connected with portable computers through USB
interface, Express interface, PCMCIA interface and other interfaces.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
YD/T 1484.1, Measurement Method for Radiated RF Power and Receiver
Performance of Wireless Device – Part 1. General Requirements
3GPP TS 34.114, User Equipment (UE)/Mobile Station (MS) Over The Air (OTA)
Antenna Performance Conformance Testing
3GPP TS 36.521-1, User Equipment (UE) Conformance Specification – Part 1.
Conformance Testing
3GPP TS 36.523-1, User Equipment (UE) Conformance Specification – Part 1.
Protocol Conformance Specification
3GPP TS 36.508, Common Test Environments for User Equipment (UE) –
Conformance Testing
3GPP TS 36.509, User Equipment (UE) Logical Test Interface – Special
Conformance Testing
3GPP TR 37.902, Measurements of User Equipment (UE) Radio Performance for
LTE/UMTS Terminal; Total Radiated Power (TRP) and Total Radiated Sensitivity
(TRS) Test Methodology
3 Terms, Definitions and Abbreviations
Unless specified otherwise, the terms, definitions and abbreviations specified in YD/T
1484.1 apply to this document.
4 Test Conditions
Unless specified otherwise, the test conditions specified in YD/T 1484.1 applies to this
Part.
5 Radiated RF Power Measurement
Unless specified otherwise, the radiated RF power measurement specified in YD/T
1484.1 applies to this Part.
5.1 FDD LTE radiated RF power measurement
5.1.1 Test procedure
Adjust the settings of LTE base station simulator in accordance with the parameters
defined in 3GPP TS 36.521-1, Section 6.2.2 (maximum output power measurement);
use the wireless device defined in 3GPP TS 36.509, Section 5.4 to build a loopback
test mode with base station simulator. During the measurement, system simulator
launches power-control commands to EUT as defined in 3GPP TS 36.521-1, Section
6.2.2.4.2 to ensure EUT is launched with maximum power during the whole
measurement process, irrespective of the effects of the configurations of MPR and A-
MPR.
Select high, middle and low channels within the frequency bands supported by EUT
for testing. Table 1 gives the details of selection of three channels -- high, middle and
low, on part of FDD LTE frequency bands; other permissible frequency bands can be
selected in accordance with the same principles.
antenna pullout state of retractable antenna EUT). See Table 4 for specific
requirements, including the types of equipment as specified in YD/T 1484.1.
Table 4 – TD-LTE Radiated Power Requirements
Frequency band 38 TIRP (dBm)
Power level Free space Only human head model
Human head and
hand model
Only human hand
model
AVG MIN AVG MIN AVG MIN AVG MIN
Max power
Categories A, B, C, E
(tablet PCs5)
16.5 15.5 Pending Pending Pending Pending Pending Pending
Max Power
Categories D, E (except
tablet PCs)
18 17 NA NA NA NA NA NA
Frequency band 39 TIRP (dBm)
Power level Free space Only human head model
Human head and
hand model
Only human hand
model
AVG MIN AVG MIN AVG MIN AVG MIN
Max power
Categories A, B, C, E
(tablet PCs)
16.5 15.5 Pending Pending Pending Pending Pending Pending
Max Power
Categories D, E (except
tablet PCs)
18 17 NA NA NA NA NA NA
Frequency band 40 TIRP (dBm)
Power level Free space Only human head model
Human head and
hand model
Only human hand
model
AVG MIN AVG MIN AVG MIN AVG MIN
Max power
Categories A, B, C, E
(tablet PCs)
16.5 15.5 Pending Pending Pending Pending Pending Pending
Max Power
Categories D, E (except
tablet PCs)
18 17 NA NA NA NA NA NA
  Frequency band 41 TIRP (dBm)
Power level Free space Only human head model
Human head and
hand model
Only human hand
model
AVG MIN AVG MIN AVG MIN AVG MIN
5 A type of personal computers which are convenient for carrying and have touch screen as the input
device.
1575 19575 10 1842.5 1747.5 50 0 50 0
1900 19900 10 1875 1780 50 0 50 0
Adjust the settings of LTE base station simulator in accordance with 3GPP TS 36.521-
1, Section 7.3 (reference sensitivity measurement) and the default parameters in TS
36.508; establish a lookback test mode between wireless device and base station
simulator. Attention shall be paid to that the initial value of forward link power shall
ensure that the BLER of EUT is zero when initial test is carried out at all points of 3-D
space; meanwhile, it shall also ensure that each RB has equal power.
If connection is not es...