QB/T 2493-2000 English PDF (QBT2493-2000)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QB/T 2493-2000
Historical versions: QB/T 2493-2000
Preview True-PDF (Reload/Scroll if blank)

QB/T 2493-2000: Disposable Diaper (Including Diapers/Pads)
QB/T 2493-2000
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
Classification No.: Y32
Record No.: 7816-2001
Disposable Diaper (including diapers/pads)
纸尿裤(含纸尿片/垫)
ISSUED ON: OCTOBER 31, 2000
IMPLEMENTED ON: APRIL 1, 2001
Issued by: State Light Industry Administration
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Product Classification ... 4
4 Technical Requirements ... 5
5 Test Methods ... 6
6 Inspection Rules ... 7
7 Marking, Packaging, Transportation and Storage ... 9
Appendix A (Normative) Determination of Permeability ... 11
Appendix B (Normative) Determination of pH ... 15
Disposable Diaper (including diapers/pads)
1 Scope
This Standard stipulates the classification, technical requirements, test methods,
inspection rules, marking, packaging, transportation and storage of disposable diapers
and diapers/pads for infants and adults.
This Standard is applicable to structures with exclusive design, in other words,
disposable diapers, and diapers/pads which are constituted of external cladding
materials, built-in absorption layer and leakproof base film, and molded through
exclusive packing machine; diapers/pads which are constituted of external cladding
materials, built-in absorption layer and leakproof base film, and molded through non-
exclusive packing machine.
2 Normative References
Through the reference in this Standard, clauses included in the following standards
become clauses of this Standard. When this Standard is published, the indicated
versions shall all be valid. All the standards will be amended, all parties adopting this
Standard shall explore the possibility of using the latest version of the following
standards.
GB/T 2677.2-1993 Fibrous Raw Material - Determination of Moisture Content
GB/T 2828-1987 Sampling Procedures and Tables for Lot-by-lot Inspection by
Attributes (apply to inspection of successive lots or batches)
GB/T 10739-1989 Paper, Board and Pulps - Conditioning of Samples and Testing
Atmospheres
GB 15979-1995 Hygienic Standard for Disposable Sanitary Products
3 Product Classification
3.1 In accordance with product structure, this Standard shall be divided into disposable
diapers for infants, disposable diapers for adults, diapers/pads for infants,
diapers/pads for adults. In accordance with specification, this Standard shall be divided
into several different sizes, namely, Size-S, Size-M and Size-L.
3.2 Disposable diapers and diapers/pads shall be divided into three grades, namely,
superior grade, first grade and qualified grade.
percentage of the average value in the 6 PCS as the measured result of full-width
deviation of this specification of samples, accurate to 1%.
NOTE: in terms of samples with elastic band, firstly, use a splint or adhesive tape to fixate
the longitudinal (or transversal) side of the sample; slightly exert strength to pull
the sample to the original length (or original width), then, use a straight ruler to
measure it.
5.2.3 Deviation of strip mass
Use a balance (division value: 0.01 g) to respectively weigh the net weight (accurate
to 0.1 g) of 6 PCS of samples of the same specification. Respectively calculate the
maximum value and the minimum value of strip mass, the difference of average value
and the percentage of the average value in the 6 PCS as the measured result of strip
mass deviation of this specification of samples, accurate to 1%.
5.2.4 Calculation of full length, full width and strip mass deviation
 100 ………………………… (1)
 100 …………………………. (2)
5.3 Permeability shall be determined in accordance with Appendix A (appendix of this
Standard).
5.4 pH shall be determined in accordance with Appendix B (appendix of this Standard).
5.5 Delivery moisture shall be determined in accordance with GB/T 2677.2. Sampling
method shall be: randomly take 2 PCS of samples from the same specification; cut off
the elastic band on the edges of the samples, then, randomly take 2 g (accurate to
0.01 g) from each PCS for the determination; take the arithmetic mean value as the
result of determination (matters needing attention: when samples are placed into a
container, the leakproof base film shall not be close to container wall, which could
prevent adhesion at a high temperature).
6 Inspection Rules
6.1 Acceptance Inspection
6.1.1 One delivery of the same type of products shall be considered as one batch. The
unit of samples for acceptance inspection shall be per box. Randomly take a sufficient
sampling size from the sample box as the samples of the box.
6.1.2 Manufacturers shall guarantee that product quality complies with the
requirements of this Standard. When products pass the inspection and are attached
with the stipulations in this Standard or ordering contract, then, the objection shall be
handled by the supply-side.
6.2 Type Inspection
Under one of the following circumstances, type inspection shall be conducted,
Inspection items are all the technical requirements of this Standard.
a) In the finalization appraisal of trial production of new and old products being
transferred to another factory for production;
b) In production, when production process is modified, or when new raw materials
are put into production, which might affect product performance;
c) In normal production, type inspection shall be conducted in each quarter;
d) When production is suspended for over 2 months, and then, resumed;
e) When the exit-factory inspection result shows significant difference from the
previous type inspection.
7 Marking, Packaging, Transportation and Storage
7.1 Sales Marking and Packaging of Products
7.1.1 On the sales package, the following content shall be indicated:
a) Product name, serial No. of implemented standard, serial No. of implemented
hygienic standard, hygienic license No., trademark;
b) Name and address of manufacturer;
c) Product variety, product quantity and product grade;
d) Date of production or batch No.;
e) Disinfecting products shall also indicate disinfection method and time of validity;
on the main surface of the package, the words “disinfection grade” shall also
be indicated.
7.1.2 Products’ sales package shall be able to prevent products from being
contaminated. Moisture-proof and seepage-proof materials with satisfying isolation
performance and sealing performance, for example, polyethylene film, shall be
selected, so as to guarantee that marking information can be distinctly printed and will
not easily fade.
7.2 Transportation and Storage of Products
Appendix A
(Normative)
Determination of Permeability
A.1 Instruments and Test Solution
A.1.1 Instruments
A.1.1.1 Balance: division value: 0.01 g, 1 set.
A.1.1.2 Sanitary pad permeability tester (hereinafter referred to as “tester”; please refer
to Figure A.1 for its sketch map), 1 set.
A.1.1.3 Standard discharge funnel (hereinafter referred to as “funnel”)
---Exclusive standard discharge funnel for disposable diapers, diapers/pads for
infants: 80 mL, 1 PCS.
---Exclusive standard discharge funnel for disposable diapers, diapers/pads for
adults: 150 mL, 1 PCS.
A.1.1.4 Measuring cylinder: 250 mL, 1 PCS.
A.1.1.5 Measuring cylinder: 10 mL, 1 PCS.
A.1.1.6 Stainless-steel clip: chuck width: around 65 mm, 4 PCS.
A.1.1.7 Beaker: 500 mL, 1 PCS.
A.1.1.8 Medium-speed chemical qualitative analysis filter paper (GB/T 1914): several
PCS, hereinafter referred to as “filter paper”...