GB/T 28678-2012 English PDF (GBT28678-2012)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 28678-2012
Historical versions: GB/T 28678-2012
Preview True-PDF (Reload/Scroll if blank)

GB/T 28678-2012: Remanufacturing of automotive components -- Pre-delivery inspection
GB/T 28678-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
Remanufacturing of automotive components -
Pre-delivery inspection
ISSUED ON: SEPTEMBER 03, 2012
IMPLEMENTED ON: JANUARY 01, 2013
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 4 
4 Pre-delivery acceptance ... 4 
Remanufacturing of automotive components -
Pre-delivery inspection
1 Scope
This standard specifies the terms and definitions and requirements for pre-
delivery acceptance of remanufactured automotive components.
This standard applies to the remanufactured automotive components. The
remanufacturing of other automotive components may refer to this standard.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) is applicable to this standard.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 6388 Transport package shipping mark
GB/T 26989 Automobile recovery - Terminology
3 Terms and definitions
The terms and definitions as defined in GB/T 26989 apply to this document.
4 Pre-delivery acceptance
4.1 Pre-delivery acceptance of products
4.1.1 The items of pre-delivery test or inspection for remanufactured products
shall be the same as the pre-delivery test or inspection items of the original
product.
4.1.2 The pre-delivery test and inspection technical indicators and safety quality
indicators of remanufactured products shall comply with the requirements of
relevant standards.