QB/T 1994-2013 English PDF (QBT1994-2013)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QB/T 1994-2013
Historical versions: QB/T 1994-2013
Preview True-PDF (Reload/Scroll if blank)

QB/T 1994-2013: Bath agents and shower agents
QB/T 1994-2013
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.40
Classification number: Y43
Filing number: 42304-2013
Replacing QB/T 1994-2004
Bath agents and shower agents
沐浴剂
ISSUED ON: OCTOBER 17, 2013
IMPLEMENTED ON: MARCH 01, 2014
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 4 
4 Product classification and marking ... 5 
5 Requirements ... 5 
6 Test method ... 6 
7 Inspection rules ... 8 
8 Signs, packaging, transport, storage ... 8 
9 Shelf life ... 8 
Bath agents and shower agents
1 Scope
This standard specifies the terms and, product classification and marking,
requirements, test methods, inspection rules, signs, packaging, transport,
storage and shelf life of bath agents and shower agents.
This standard applies to cleansing products formulated with surfactants and
conditioning agents for cleansing and moisturizing the skin (except soap).
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 13173 -2008 Surfactant - Test method for detergent (ISO 607:1980,
ISO 2996:1974, MOD)
GB/T 26396-2011 Technical specification for safety of soaps and detergents
QB/T 2951 Inspecting rules for detergent products
QB/T 2952 Requirements for detergent marks and packaging
JJF 1070 Rules of metrological testing for net quantity of products in
prepackages with fixed content
“Measures for the Supervision and Administration of Measurement of
Quantitative Packaging Commodities” -- State Administration of Quality
Supervision, Inspection and Quarantine – [2005] Order No.75
WJDF [2007] No.1 "Hygienic Specifications for Cosmetics" (2007 edition)
3 Terms and definitions
The terms and definitions apply to this document.
3.1
light conditions.
Block products: Observe it in indirect light conditions.
6.2 Odor
Take an appropriate amount of specimen for identification by smelling.
6.3 Stability
Take two sets of specimens of not less than 100 mL. Respectively place it into
250 mL colorless wide-mouth glass bottle with stopper. Put one set in a (40 ±
2) °C incubator for 24 h. Take it out and restore it to room temperature to
observe it. Put the other set in a (-5 ± 2) °C refrigerator for 24 h. Take it out and
restore it to room temperature to observe it.
6.4 Total effective substance
Generally, make determination according to the method A as specified in
Chapter 7 of GB/T 13173-2008.
When the product contains the surfactant which is insoluble in ethanol, or in the
ordering contract it specifies that the testing results of total effective substance
content do not contain water cosolvent, meanwhile requires making
determination by the trichloro-methane extraction, it shall be determined
according to the method B in Chapter 7 of GB/T 13173-2008.
6.5 pH
Perform test according to the method as specified in WJDF [2007] No.1
"Hygienic Specifications for Cosmetics" (2007 edition).
The test temperature is 25 °C. Use the newly boiled and cooled distilled water
to prepare it. The mass concentration of the test solution of the liquid or paste
product is 10%; the solid product is 5%. Make determination after mixing it
uniformly.
6.6 Mercury, lead, arsenic, microorganisms
Perform test according to the method as specified in WJDF [2007] No.1
"Hygienic Specifications for Cosmetics" (2007 edition).
6.7 Net content
Perform test according to the provisions of JJF 1070.