QC/T 755-2020 English PDF (QCT755-2020)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QC/T 755-2020
Historical versions: QC/T 755-2020
Preview True-PDF (Reload/Scroll if blank)

QC/T 755-2020: Technical Requirements of Fuel-Gas System for LNG Vehicles
QC/T 755-2020
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.080
T 47
Replacing QC/T 755-2006
Technical Requirements of Fuel-Gas System for LNG
Vehicles
ISSUED ON: DECEMBER 09, 2020
IMPLEMENTED ON: APRIL 01, 2021
Issued by: Ministry of Industry and Information Technology of PRC
Technical Requirements of
Fuel-Gas System for LNG Vehicles
1 Scope
This Document specifies the terms and definitions of automobile fuel-gas systems that
use liquefied natural gas (hereinafter referred to as LNG) fuel, the composition and
technical requirements of fuel-gas system of LNG vehicles, as well as the specific
requirements for gas storage components, gas supply components, refuelling
components and safety components.
This Document applies to LNG vehicles or dual-fuel and bi-fuel vehicles that use LNG
and other fuels. The nominal working pressure of the gas cylinder of the fuel-gas
system is no more than 1.6MPa; and the working pressure of the gas supply
components is no more than 35MPa.
2 Normative References
The following documents are essential to the application of this Document. For the
dated documents, only the versions with the dates indicated are applicable to this
Document; for the undated documents, only the latest version (including all the
amendments) is applicable to this Document.
GB/T 3 Ordinary Thread End, Shoulder Distance, Undercut and Chamfer
GB/T 193 General Purpose Screw Threads - Diameters and Pitches
GB/T 197 General Purpose Metric Screw Threads - Tolerances
GB/T 1220 Stainless Steel Bars
GB/T 1226 General Pressure Gauge
GB/T 1804 General Tolerances - Tolerances for Linear and Angular Dimensions
without Individual Tolerance Indications
GB/T 2408-2008 Plastics - Determination of Burning Characteristics - Horizontal
and Vertical Test
GB/T 3103.1-2002 Essential Oils and Aromatic Extracts – Determination of
GB/T 36123 Technical Requirements for Gas Leakage Alarm Device of Gas
Vehicle
GB/T 36883 Technical Specification of LNG Vehicle
JT 230 Rubber Belt of Electrostatic Conductivity
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in GB/T 17895,
GB/T 13005, GB/T 34510, GB/T 19204 and the following apply.
3.1 Fuel-gas system for LNG vehicles
A complete system that consists of LNG gas storage components, gas supply
components, refuelling components and safety components installed on LNG vehicles.
3.2 Vehicular tank
It is a pressure vessel (hereinafter referred to as a gas cylinder) that is used by LNG
vehicles to store and supply LNG fuel.
3.3 Accessories
In the gas storage parts, the liquid level sensor, liquid level transmitter, economic
regulating valve, one-way valve, pressure gauge, relief valve (primary relief valve,
auxiliary relief valve), pressure relief pipeline and other devices other than gas
cylinders.
3.3.1 Liquid level sensor
A device that is installed in the gas cylinder, used to reflect the real-time liquid level of
LNG, and can send out liquid level signal.
3.3.2 Liquid level transmitter
A device that converts the input signal of the liquid level sensor into a signal that can
be received by the liquid level indicator.
3.3.3 Liquid level indicator
An instrument that is installed on the operating panel of the cab to display the
remaining amount of LNG in the gas cylinder.
3.3.4 Prime relief valve
relief valve (primary relief valve, auxiliary relief valve), pressure relief pipeline
and venting globe valves, etc., and can be equipped with pressure sensors. For
gas storage components with forced liquid supply function, it shall also include
forced liquid supply, control and driving devices;
--- Gas supply components shall include liquid supply shutoff valve, supply line flow
regulation valve, liquid supply pipeline (pipeline and loose joints, etc.) and
vaporizer, one-way valve, pressure reducing regulator, solenoid valve, pressure
gauge, etc., and can be equipped with buffer tank, gas temperature control
device, gas recovery device and pressure sensor and other components;
--- Refilling components shall include filling port, air return port, connecting pipeline
and one-way valve, etc.;
--- Safety components shall include gas leakage alarm devices, gas cylinder
protection devices and rubber belt of electrostatic conductivity for motor vehicle,
etc.
5 Technical Requirements for Fuel-Gas System
5.1 General requirements
5.1.1 The fuel gas system shall be manufactured in accordance with the product
drawings and other technical documents approved by the prescribed procedures; and
shall comply with the provisions of GB/T 36883.
5.1.2 All components in the fuel gas system shall have operating conditions and quality
inspection certificates provided by the manufacturer; and the explosion-proof
performance of electrical components shall comply with the provisions of GB 3836.1.
5.1.3 The installation of the fuel gas system shall comply with the provisions of GB/T
20734 and GB 19239.
5.1.4 When one of the following situations occurs, the fuel gas system shall be able to
automatically cut off the LNG supply:
a) The ignition switch is not turned on;
b) The engine is not running;
c) The LNG gas supply pipeline is broken, falling off, etc.
5.1.5 The gas cylinders in the fuel gas system shall be able to adapt to the working
environment temperature requirements specified in GB/T 34510-2017. Other parts and
components shall be able to adapt to the respective working environment temperature
the joint should be a double-ferrule joint or end face sealing joint.
5.4.3 The test pressure of the fuel gas hose and the circulating water hose shall be
twice the working pressure; and the burst pressure shall be no less than 4 times the
working pressure.
6 Gas Storage Parts
6.1 Gas cylinder
6.1.1 Bursting discs shall not be installed in gas cylinders. The gas cylinder shall
comply with the provisions of GB/T 34510 or GB/T 24159.
6.1.2 The gas cylinder shall be provided with a permanent nameplate identification;
which shall comply with the relevant provisions of GB/T 34510. When installing the gas
cylinder on the vehicle, it must not cover the nameplate mark.
6.1.3 The pipelines of LNG entering and exiting cylinders need to have indication
marks to indicate the function of the pipeline and the direction of fluid flow. The marks
should not be blurred due to "frosting".
6.1.4 If the gas cylinder is equipped with an LNG pump with compulsory liquid supply
function, there shall be an LNG pump working pressure mark on it.
6.2 Accessories
6.2.1 General requirements
6.2.1.1 The working pressure of all accessories of the gas cylinder shall be no less
than the nominal working pressure of the gas cylinder and the working pressure of this
part.
6.2.1.2 During the inspection period of gas cylinders, the performance of all seals shall
comply with the provisions of 5.1.6.
6. 2. 2 Liquid level device
6.2.2.1 The liquid level transmitter shall meet the following requirements:
--- the function of fault diagnosis, the sensor short circuit, open circuit and abnormal
data sent by the transmitter shall be displayed on the instrument.
--- If the protection level reaches IP67, the explosion-proof performance meets the
intrinsic safety requirements in GB 3836.1 and GB 3836.4, and the
electromagnetic compatibility meets the relevant requirements of 4.5, 4.6, 4.7,
4.8 in GB 34660-2017, and GB/T 1995...