QC/T 1058-2017 English PDF (QCT1058-2017)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QC/T 1058-2017
Historical versions: QC/T 1058-2017
Preview True-PDF (Reload/Scroll if blank)

QC/T 1058-2017: Fingerprint recognition thief resistant automobile equipment
QC/T 1058-2017
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.60
T 26
Fingerprint recognition thief resistant automobile
equipment
ISSUED ON: JANUARY 09, 2017
IMPLEMENTED ON: JULY 01, 2017
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Announcement ... 3 
Foreword ... 9 
1 Scope ... 10 
2 Normative references ... 10 
3 Terms and definitions ... 11 
4 Principle ... 12 
5 General requirements ... 12 
6 Technical requirements ... 13 
7 Main technical parameters ... 15 
8 Test methods ... 18 
9 Inspection rules ... 23 
10 Marking, packaging, transportation, storage ... 24 
Annex:
References, names and dates of implementation of 42 automotive industry
standards
No. Standard reference Standard name
Standard
reference being
substituted
Date of
implementation
250 QC/T 776-2017 Motor caravan QC/T 776-2007 2017-07-01
251 QC/T 1051-2017 Coach car 2017-07-01
252 QC/T 1052-2017 Communication vehicle 2017-07-01
253 QC/T 1053-2017 Concrete spraying vehicle 2017-07-01
254 QC/T 1054-2017 Tunnel cleaning vehicle 2017-07-01
255 QC/T 1055-2017 Drainage and rescue vehicle 2017-07-01
256 QC/T 218-2017
Technical
specifications for
steering column
upper combined
switch of automobile
QC/T 218-1996 2017-07-01
257 QC/T 1056-2017
Technical
requirements and test
methods for
automotive dual
clutch automatic
transmission
assembly
2017-07-01
258 QC/T 245-2017
Technical
specifications for
isolated plant of
compressed-natural-
gas (CNG)
automobile
QC/T 245-2002 2017-07-01
259 QC/T 247-2017
Technical
specifications for
isolated plant of
liquefied petroleum
gas
QC/T 247-2002 2017-07-01
260 QC/T 1057-2017 Car snow chains 2017-07-01
261 QC/T 1058-2017 Car fingerprint identification device 2017-07-01
273 QC/T 1060-2017
Automotive
hexagonal flower
flange bolts
2017-07-01
274 QC/T 1061-2017
Road transport
lightweight fuel tank
vehicle anti-overflow
system
2017-07-01
275 QC/T 1062-2017
Road transport
lightweight fuel tank
vehicle unloading
valve
2017-07-01
276 QC/T 1063-2017
Road transport
lightweight fuel tank
vehicle oil and gas
recovery components
2017-07-01
277 QC/T 1064-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
breathing valve
2017-07-01
278 QC/T 1065-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
manhole cover
2017-07-01
279 QC/T 789-2017
Performance
requirements and
bench test methods
of automobile electric
vortex retarder
assembly
QC/T 789-2007 2017-07-01
280 QC/T 316-2017
Bench test methods
of fatigue strength for
automobile service
brake
QC/T 316-1999 2017-07-01
281 QC/T 201-2017
Nylon pipe joint size
for automobile air
brake
QC/T 201-1995 2017-07-01
282 QC/T 1066-2017
Performance
requirements of cable
assembly for vehicle
parking brakes and
bench test method
2017-07-01
Fingerprint recognition thief resistant automobile
equipment
1 Scope
This standard specifies the terms and definitions, principles, general
requirements, technical requirements, main technical parameters, test methods,
inspection rules, marking, packaging, transportation and storage of fingerprint
recognition thief resistant automobile equipment (hereinafter referred to as
"devices").
This standard applies to the fingerprint recognition thief resistant automobile
equipment.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB 4208 Degrees of protection provided by enclosure (IP code)
GB/T 17619-1998 Limits and methods of testing for immunity of electrical /
electronic sub-assemblies in vehicles to electromagnetic radiation
GB/T 17626.2 Electromagnetic compatibility (EMC) - Testing and
measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility - Testing and measurement
techniques - Radiated radio-frequency electromagnetic field immunity test
GB/T 19951 Road vehicles - Test methods for electrical disturbances from
electrostatic discharge
GB/T 21437.2-2008 Road vehicles - Electrical disturbances from conduction
and coupling - Part 2: Electrical transient conduction along supply lines only
QC/T 29106 Technical specification of low-voltage electric harness for motor
vehicles
Refusal rejection rate (FRR)
The proportion of the fingerprint images which are acquired respectively
from same finger and judged as the different fingers when performing 1:1
matching, expressed as a percentage.
3.7
One time watching rate [translator’s note: shall be one time matching
rate]
The proportion of the fingerprint images which are matched successfully and
enrolled at the first time of operation when judging the fingerprint images
which are acquired respectively from same finger as the same finger in the
course of performing 1:1 matching, expressed as a percentage.
3.8
False enrollment rate
The proportion of the fingerprints of the personnel who are rejected for
enrollment because the fingerprint images as acquired from the same finger
after processing cannot generate a template when extracting the fingerprint
features and cannot form the basis of matching, expressed as a percentage.
3.9
Miss work
The phenomena that the function of the device cannot be normally turned
on or off when it is disturbed by any external factors.
4 Principle
The fingerprint recognition thief resistant automobile equipment is mainly
composed of a host computer, a standalone module for fingerprint recognition,
an alarm device, a wire harness.
5 General requirements
5.1 The device shall have the function to prevent unauthorized users from
starting the engine or other major power source of the vehicle normally. The
drive power system of the vehicle cannot be started until the system is turned
on.
5.2 The size of the device or screen for acquiring the fingerprint image shall be
vehicle battery is replaced, the fingerprint information saved by the fingerprint
enrollment shall not be lost. Except for manual deletion or damage, fingerprint
information shall be permanently stored for a long time.
6.4.4 Management of usage rights.
The device shall have a hierarchical management function for user’s usage
rights. It shall have a corresponding authorization mechanism in the process of
fingerprint enrollment or deletion.
6.5 Basic functions of host
6.5.1 Vehicle start function.
It shall be able to set the automatic start or manual start of the vehicle engine.
The device shall have dual backup protection function. If one of the relays fails,
it will not affect the normal start and driving of vehicle.
6.5.2 System function.
When it is necessary to temporarily turn off the function of the device (such as
vehicle washing, repair, maintenance), the vehicle is brought to the state where