QB/T 4079-2010 English PDF (QBT4079-2010)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QB/T 4079-2010
Historical versions: QB/T 4079-2010
Preview True-PDF (Reload/Scroll if blank)

QB/T 4079-2010: Massage base oil, Massage oil
QB/T 4079-2010
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.70
Classification No.: Y42
Record No.: 30243-2011
Massage Base Oil, Massage Oil
按摩基础油, 按摩油
ISSUED ON: NOVEMBER 22, 2010
IMPLEMENTED ON: MARCH 01, 2011
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Classification ... 5
5 Requirements ... 5
6 Test Methods ... 6
7 Inspection Rules ... 7
8 Marking, Packaging, Transportation, Storage and Shelf Life ... 7
Appendix A (Normative) Test Methods of the Acid Value ... 9
Appendix B (Normative) Test Methods of the Peroxide Value ... 11
Appendix C (Normative) Test Methods of the Saponification Value ... 13
Massage Base Oil, Massage Oil
1 Scope
This Standard specifies the terms and definitions, classification, requirements, test
methods, inspection rules and marking, packaging, transportation, storage and shelf
life of massage base oil and massage oil.
This Standard is applicable to massage base oil and massage oil products, not to
children's massage products or eye massage products
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB 5296.3 Instruction for Use of Consumer Products - General Labelling for
Cosmetics
GB/T 26516 Massage Essential Oil
QB/T 1684 Inspecting Rules for Cosmetics
QB/T 1685 Requirements of Packaging Appearance for Cosmetic Products
JJF 1070 The Rules of Metrological Inspection for Net Content of Prepackaged
Commodity with Fixed Content
No. 75 Command of the General Administration of Quality Supervision, Inspection
and Quarantine Measures for the Supervision and Management of
Quantitative Packaging Commodities
WJDF [2007] No. 1 Hygienic Standard for Cosmetics
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
6.3 Hygienic indicators
Test according to the method specified in the WJDF [2007] No.1 provision
6.4 Net content
Test according to the relative density method in D.3 or D.4 in Appendix of JJF 1070.
6.5 Appearance requirements of packaging
Test according to the provisions of QB/T 1685.
7 Inspection Rules
It shall be implemented according to QB/T 1684.
8 Marking, Packaging, Transportation, Storage and
Shelf Life
8.1 Marking of sales packaging
8.1.1 The Massage base oil should indicate the type of plant oil added to the product
8.1.2 The massage oil shall be marked by the following contents:
a) Type and content of the massage essential oil;
b) Type of plant oil of the massage base oil added to the product;
c) Avoid contact around the eyes;
d) Do not take orally;
e) Do not use for pregnant women, infants, people with high blood pressure, kidney
disease, epilepsy, skin damage; those with sensitive skin can only use after
passing the skin test.
f) Avoid light, seal and store at low temperature.
8.1.3 Other markings shall be implemented as per GB 5296.3.
8.2 Packaging
The inner packaging of the product shall be sealed with glass or ceramic bottles that
can be protected from light. Others shall be implemented according to QB/T 1685
Appendix A
(Normative)
Test Methods of the Acid Value
A.1 Principle
Titrate the free fatty acids in massage essential oil and massage oil by potassium
hydroxide standard solution.
A.2 Reagents and materials
Unless otherwise specified, the reagents are analytically pure; and the water is distilled
water or water of equivalent purity.
A.2.1 Ether-ethanol mixture: mix according to ether-ethanol (2+1, volume fraction).
Use the potassium hydroxide solution (3g/L) to neutralize until the phenolphthalein
indicator solution was neutral.
A.2.2 Potassium hydroxide standard titration solution [c(KOH) = 0.05 mol/L].
A.2.3 Phenolphthalein indicator solution: 10 g/L ethanol solution.
A.3 Instruments
A.3.1 Analytical balance: accuracy of 0.0001g.
A.3.2 Conical flask.
A.3.3 Burette.
A.4 Analysis procedures
Accurately take 3g~5g of sample (accurate to 0.0001g); place it in a conical flask; add
50mL of neutral ether-ethanol mixture (A.2.1); shake to dissolve the oil; and put it in
hot water, if necessary, to promote its dissolution. Cool to room temperature, add 2~3
drops of phenolphthalein indicator solution (A.2.3); titrate by 0.05 mol/L potassium
hydroxide standard titration solution (A.2.2), until it appears reddish; and the end point
is that the solution does not fade within 0.5min.
A.5 Calculation of results
The acid value is calculated according to Formula (A.1):
Appendix B
(Normative)
Test Methods of the Peroxide Value
B.1 Principle
During the oxidation of massage base oil and massage oil, peroxide is generated; and
it interacts with potassium iodide to generate free iodine. Titrate by sodium thiosulfate
solution; and calculate the content
B.2 Reagents and materials
Unless otherwise specified, the reagents are analytically pure; and the water is distilled
water or water of equivalent purity.
B.2.1 Saturated potassium iodide solution: take 14g of potassium iodide; add 10mL of
water to dissolve; dissolve with slight heat if necessary; cool and store in a brown bottle.
B.2.2 Chloroform-glacial acetic acid mixture: take 40mL of chloroform; add 60mL of
glacial acetic acid; and mix well.
B.2.3 Sodium thiosulfate standard titration solution [c(Na2S2O3) = 0.002 mol/L].
B.2.4 Starch indicator (10 g/L): take 0.5g of soluble starch; add a little water to make
a paste; pour into 50mL boiling water and mix well; boil. Prepare it just before use.
B.3 Instruments
B.3.1 Analytical balance: accuracy of 0.0001g.
B.3.2 Conical flask.
B.3.3 Burette.
B.4 Analysis procedures
Take 2.00g~3.00g of the mixed sample; place it in a 250mL iodine flask; and add 30mL
of chloroform-glacial acetic acid mixture (B.2.2) to completely dissolve the sample. Add
1.00 mL of saturated potassium iodide solution (B.2.1); tightly cap the bottle; and gently
shake for 0.5 min; then place in the dark for 3 min. Take it out and add 100mL of water;
shake well; and immediately titrate by 0.002 mol/L sodium thiosulfate standard titration
solution (B.2.3). When it is pale yellow, add 1mL of starch indicator (B.2.4); continue
to titrate till blue color disappears as the end point.
Appendix C
(Normative)
Test Methods of the Saponification Value
C.1 Principle
Under the reflux condition, boil the sample and the potassium hydroxide-ethanol
solution; and then titrate the excessive potassium hydroxide by a calibrated
hydrochloric acid solution.
C.2 Reagents and materials
Unless otherwise specified, the reagents are analytically pure; and the water is distilled
water or water of equivalent purity.
C.2.1 Potassium hydroxide-ethanol solution: dissolve about 0.5 mol/L potassium
hydroxide in 95% (volume fraction) ethanol. This solution shall be colorless or light
yellow. A stable colorless solution may be prepared by any of the following procedures:
a) Place 8g of potassium hydroxide and 5g of aluminum flakes in 1L of ethanol to
reflux for 1h; and immediately distill. Dissolve the required amount of potassium
hyd...